| | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Continued 9 | | |
| | | |
| | | Locking Groove accepts 2 x M8 3 16 set screws | | |
| | | |
| | | Attachment Nut - Vz" Square Drive SS 316 / PETP with internal thread | | |
| | | |
| | | Kiwiprops' | | |
| | | |
| | | ockifig Screws (2 x M8 ) lock Nut to Boss Crease Hole - Aft end of unit Reversing Rollers X3-SS316 Internal drive dogs transfer torque to the matching dogs recessed in blade carrier PETP Bearing Sleeve under Blade Carrier | | |
| | | |
| | | Propeller Boss - Attached to Shaft May be Spline dor Tapered internally Stainless Steel 316 Grade | | |
| | | |
| | | Groove holds spigot in Nose Cones O-Rings fitted to blade root recesses | | |
| | | Brass Nickel Silver Blade Retaining Pin | | |
| | | |
| | | |
| | | Blade Carrying Assembly-- Mou Internal dogs allow 100 deg of | | |
| | | nts on Boss rotation | | |
| | | |
| | | |
| | | Legs carry each blade itfittvpin pressed into groove at end of each leg. SS 316 Grade. | | |
| | | |
| | | Torsion Spring to return Blade Asseni bly to the feathered position after reverse function Left Handed units have Right Handed Spring. Stainless Steel 304 Grade | | |
| | | |
| | | PETP Nose Con.es;(split) with identical^ ntemal shape fair the stream line sfor-either a Shaft or various Saildrive installation. | | |
| | | |
| | | Locates the provide "the p | | |
| | | the torsion sprini d tens ion | | |
| | | |
| | | |
| | | Transfers forward thrust via spigot n the Boss above | | |
| | | ve | | |
| | | |
| | | |
| | | Split for assembly and to allow the two halves to be tightened with 4 x SS 316 cap screws to prevent rotation over knurled boss surface due to spring tension | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | |