Selecting the Right Autopilot Drive Unit Selecting the Right Autopilot Drive Unit

Drive Units Identify the correct drive unit type* for your boat (refer to the table on pages 66 – 68), then use the following information to identify the correct model.

* We recommend that a Raymarine approved dealer confirms your selection and carries out the installation and commissioning. Approved installations carry a FULL 2 YEAR WORLDWIDE WARRANTY. For more information contact your national distributor (see outside back cover for details) or consult www.raymarine.com
Course ComputerRotary Rudder RefererenceFluxgate Compass

Type 1 and 2 Rotary DriveStandard and Universal SterndriveType 1 and 2 Linear Drive Type 1, 2 and 3 Hydraulic PumpsType 2 and 3 Hydraulic Linear DriveConstant Running Pumps

Universal Sterndrive shown. BOAT LADEN DISPLACEMENT (MAXIMUM): DRIVE: Electromechanical for power-assisted sterndrive systems.Not all sterndrive systems are supported. BOAT LADEN DISPLACEMENT (MAXIMUM): Type 1: 10,000kg (22,000lb) Type 2S: 15,000kg (33,000lb), Type 2L: 20,000kg (44,000lb) BOAT STEERING RAM CAPACITY: BOAT LADEN DISPLACEMENT (MAXIMUM): Type 2: 22,000kg (48,500lb), Type 3: 35,000kg (77,000Ib) Type 1: 10,000kg (22,000lb)Type 2: 20,000kg (44,000lb) Type 1: 4.9in
3 – 14in
3 (80cc – 230cc) Type 2: 14in
3 – 21in
3 (230cc – 350cc) Type 3: 21in PEAK THRUST:

Contact product support for information

MAXIMUM THRUST: PEAK THRUST:
3 – 30.5in
3 (350cc – 500cc) Type 2: 585kg (1290lb, Type 3: 1000kg (2200Ib) PEAK OUTPUT TORQUE: 150kg (330lb) Standard sterndrive80kg (175lb) Universal sterndrive Type 1: 295kg (650lb), Type 2S/Type 2L: 480kg (1050lb) Type 1: 20Nm (180lb.in) Type 2: 34Nm (300lb.in) MAXIMUM STALL PRESSURE AT 12V: MAXIMUM STROKE: STROKE: Type 1: 750psi (50bar) Type 2: 1450psi (100bar) Type 3: 1160psi (80bar) Type 2: 254mm (10in), Type 3: 300mm (12in) HARDOVER TIME: Type 1/Type 2S: 300mm (12in), Type 2L: 400mm (16in) MAXIMUM SHAFT SPEED: 8.8secs PEAK FLOW RATE (NO LOAD): HARDOVER (NO LOAD): 33rpm HARDOVER TIME (NO LOAD): Type 1: 67in Type 2: 10secs, Type 3: 12secs STROKE: Type 1/Type 2S: 11secs, Type 2L: 14secs SPROCKETS:M81182 214mm (8.3in)
3 /min (1000cc/min) Type 2: 122in MAXIMUM RUDDER TORQUE: 13T sprocket RUDDER TORQUE (MAXIMUM):
3 /min (2000cc/min) Type 3: 175in Type 2: 1270Nm (11,300lb.in) Type 3: 2565Nm (23,100Ib.in) M81183 15T sprocket Type 1: 735Nm (6500lb.in), Type 2S: 1190Nm (10,500lb.in),Type 2L: 1660Nm (14,700lb.in)
3 /min (2900cc/min) M81185 19T sprocket M81186 25T sprocket DRIVE UNIT PART NUMBERS:M81135 DRIVE UNIT PART NUMBERS:M81138 DRIVE UNIT PART NUMBERS: M81130 Type 1 (12V) DRIVE UNIT PART NUMBERS:M81120 DRIVE UNIT PART NUMBERS:M81200 Type 1 (12V) Standard sterndrive M81131 Type 2S (Short) (12V) Type 1 (12V) Type 2 (12V) M81136 Type 2 (12V) E12026 Universal sterndrive M81132 Type 2L (Long) (12V) M81119 Type 1 (24V) M81201 Type 2 (24V) M81137 Type 2 (24V) M81133 Type 2S (Short) (24V) M81121 Type 2 (12V) M81202 Type 3 (12V) M81134 Type 2L (Long) (24V) M81123 Type 2 (24V) M81203 Type 3 (24V) M81122 Type 3 (12V) M81124 Type 3 (24V)

Type 1 Drive - SmartPilot S1/S2/S3/SPX-10 Course ComputersType 2 Drive - SmartPilot S3/SPX-30 (12v/24v) Course ComputersAll 24V Drives - use SmartPilot S3/SPX-10/SPX-30 Course ComputersType IO Drive - SmartPilot S1/S2/S3/SPX-10 Course ComputersType 1 Drive - SmartPilot S1/S2/S3/SPX-10 Course ComputersType 2 Drive - SmartPilot S3/SPX-30 Course ComputersAll 24V Drives - use SmartPilot S3/SPX-10/SPX-30 Course Computers Type 1 (12v) Drive - SmartPilot S1/S2/S3/SPX-10 Course ComputersType 1 (24v) Drive - SmartPilot S3/SPX-10 Course ComputersType 2/3 (12v/24v) Drive - SmartPilot S3/SPX-30 Course ComputersSuitable for SmartPilot S3/SPX-30 Corepacks only.

* Includes G version SmartPilot.
220mm240mm 460mm mid-stroke 103mm63mm

STANDARD STERNDRIVE TYPE 1 AND 2 LINEAR DRIVE** NOT SUPPLIED (CONTACT STEERING MANUFACTURER)

777mm (T1/T2S) 930mm (T2L) 540mm (T2) 690mm (T3) 274mm 197mm 250mm (T1/T2S)350mm (T2l) 114mm == 134mm 62mm103mm 101mm 180mm (T2)267mm (T3) 195mm 184mm 60mm256mm 911mm1115mm354 – 568mm 166mm 106mm

UNIVERSAL STERNDRIVETYPE 1 AND 2 ROTARY DRIVE TYPE 1, 2 AND 3 HYDRAULIC (TYPICAL SIZE SHOWN)TYPE 2 AND 3 HYDRAULIC LINEAR** NOT SUPPLIED (CONTACT STEERING MANUFACTURER)

For Cables & Accessories see page 121