Environmental Data mode • Sea temperature. • Barometric pressure and barometric pressure log.• Sunrise and sunset. • Sea temperature (minimum and maximum).• Air temperature and air temperature log.• Air temperature (minimum and maximum).
54 InstrumentsInstruments 55 Engine Data mode • Engine RPM. • Fuel fl ow and fuel level. • Battery voltage and battery voltage log.• Battery Amps and temperature. • Engine hours. • Trim position. • Oil pressure and oil temperature. • Coolant temperature and pressure.• Boost pressure. ST70 Autopilot Control • Simple start-up wizard quickly confi gures the autopilot.• Compatible with SPX course computers and existing ST1 course computers.• Choose from digital display, compass rose or 3D isometric screens.• Capable of displaying an additional 3 boxes of instrument data.• Multilingual. • New simplifi ed set-up and calibration confi guration.• Fits within the standard ST6002 or ST60+ footprint.• Surface or fl ush mount. • Power on/off switch. • Can be used as a master display or a colour repeater to an existing system.• Intuitive dodge function – when connected to an SPX range course computer.• Extensive fi shing patterns – when connected to an SPX range course computer.

SeaTalk

ng

Networking

Non SeaTalk Integration Wind mode ST70 uses Raymarine's newest network technology (SeaTalk • Apparent wind speed and apparent wind angle.• True wind speed and true wind angle.• GWD (Ground Wind Direction). • Beaufort scale. • Cardinal. • Wind speed log and wind direction log.• Minimum and maximum apparent wind speed.• Minimum and maximum true wind speed.
ng ).• 11mm diameter connectors for improved networking in tight spaces.• Positive locking connectors. • Quick and easy to install. • Colour coded and keyed connectors for foolproof installation.• NMEA 2000 compatible.• Connectors waterproof to IPX6 standard. • Rugged and reliable.
ng Networking SeaTalk
ng works seamlessly with our SeaTalk and SeaTalk
2 enabled networks and products. An adaptor cable is supplied with each ST70 display to connect existing SeaTalk products.An optional adaptor is also available as an accessory for plug and play integration with NMEA 2000 compliant devices.
Page 102 for product specifications SeaTalk ng compact connectors allow for quick yet secure networking. ST70 InstrumentsDepth Transducer and PodSpeed Transducer and Pod SeaTalk 5-Way Connector and Terminator Wind Transducer and Pod Power Cable ng Backbone Cable • Add colour to your ST60 instrument system with an ST70 multifunction instrument.• Each ST70 instrument is supplied with a first generation SeaTalk adaptor cable for plug and play connectivity with ST60/ST60 Plus instruments.• ST70 intelligently converts first-generation SeaTalk data to SeaTalk
ng .

Wind, Depth and Speed Transducers

TECH TIP TECH TIP ST70 uses the same transducers as the ST60 range of instruments. However, SeaTalk
ng transducer pods are required to link the transducers to the ST70 network. Transducers and pods are sold separately. SmartController Take full, on-board control of your Raymarine SeaTalk instruments with the wireless SmartController. Wireless operation means freedom to monitor vital information when on deck or out of sight of your instruments. Take control of your autopilot from the foredeck.
With its intuitive graphic menu system and on screen prompts, ST70 is easy to setup and customise to suit your instrumentation requirements. ST70 Autopilot Control HeadStandard ST70 instrument head Three data pages (night mode)Engine hours (night mode)11 Languages availableSelect your units of choiceSet alarms as requiredSelect the data you want TRANSDUCER PODDEPTH TRANSDUCERSSPEED TRANSDUCERSWIND TRANSDUCERS Compatible with existing ST60 transducers (when used with an ST70 transducer pod) and new SmartTransducers. Available early 2008 – Smart Transducers. A22111: DST800 Depth/Speed/Temperature and A22112: DT800 Depth/Temperature transducers fitted with SeaTalk ng backbone.