R&M Wall Systems en - 28 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalogue excerpts

wall systems_2010.qxp:wall systems_2010 26.05.2010 8:29 Uhr Seite 1 R&M Wall Systems Versatile: R&M Wall Systems We differentiate between two different types of wall systems. In order to satisfy all the possible demands in the field of internal furnishings, several categories of these wall types are available, which can be configurated as single walls, double walls or multilayer walls. Each wall category has its application purpose and aim in order to precisely perform its task in the completion of the interior.

 Open the catalogue to page 1

wall systems_2010.qxp:wall systems_2010 26.05.2010 8:29 Uhr Seite 7 R&M Wall Systems Type Outer layer Current fire classification Sound reduction Mass per area SW25 Steel | Steel Steel | Aluminum Aluminum | Aluminum B-15 B-0 C 29 dB --24 dB 16.5 kg/m² 13.3 kg/m² 9.0 kg/m² Double wall SW25 Steel | Steel Aluminum | Aluminum B-15 B-30 38 dB 32 dB 33.0 kg/m² 20.6 kg/m² SW25NF Steel | Steel Steel | Aluminum Aluminum | Aluminum B-15 B-0 C 30 dB ----- 15.6 kg/m² 12.0 kg/m² 8.2 kg/m² Double wall SW25NFP Steel | Steel B-30 45 dB 26.1 kg/m² Corner panel SW25/SW25NF Steel | Steel Aluminum | Aluminum B-15...

 Open the catalogue to page 2

wall systems_2010.qxp:wall systems_2010 02.06.2010 19:04 Uhr Seite 9 Sandwich wall 25 – SW25 Similar to image Sandwich wall 25 – SW25 Similar to image 06_10 engl. The SW25 sandwich wall is an alternative solution to the standard wall in situations where space and weight play important roles. It also has the B-15 fire classification. The assembly is based on the tongue and groove principle. The wall is connected to the floor using prefabricated U-shaped sections, available in a number of different lengths from the manufacturer. The sections are laid out and fastened onto the floor. A large variety...

 Open the catalogue to page 3

wall systems_2010.qxp:wall systems_2010 02.06.2010 19:04 Uhr Seite 10 Sandwich wall 25 – SW25 Sandwich wall 25 – SW25 Sandwich wall 25 – SW25 Technical data Aluminum | or Aluminum Stainless steel | Stainless steel Wall Systems Steel | Aluminum or Fire classification Steel | Steel Stainless steel | Aluminum B-15 B-0 C (higher rating in progress) Sound reduction according 29 dB --- 24 dB Element width 250 – 650 mm 250 – 600 mm 250 – 650 mm Element length 1000 – 2475 mm 1000 – 2475 mm 1000 – 2475 mm Thickness 25 mm 25 mm 25 mm Mass per area – panel 16.5 kg/m² 13.3 kg/m² 9.0 kg/m² Mass per length...

 Open the catalogue to page 4

wall systems_2010.qxp:wall systems_2010 02.06.2010 19:05 Uhr Seite 11 Double sandwich wall 25 – SW25 Similar to image Double sandwich wall 25 – SW25 Similar to image 06_10 engl. Besides the SW25 single walls, the R&M product range offers SW25 double walls as well. According to customer requirements, the double walls can be produced with steel or lightweight aluminum layers. Both variants are B-15 and B-30 fire rated, respectively. With a mass of only 20.6 kg/m², the aluminum version is especially used when the weight on board plays an important role. If the 50 mm air gap between the walls is filled...

 Open the catalogue to page 5

wall systems_2010.qxp:wall systems_2010 02.06.2010 19:05 Uhr Seite 12 Double sandwich wall 25 – SW25 Double sandwich wall 25 – SW25 with 50 mm air gap Double sandwich wall 25 – SW25 Technical data Steel | Steel Aluminum | or Aluminum Wall Systems Stainless steel | Stainless steel Fire classification B-15 B-30 Sound reduction according 38 dB 32 dB to DIN EN ISO 140-3 (42 dB with filled air gap) Element width 250 – 650 mm 250 – 650 mm Element length 1000 – 2475 mm 1000 – 2475 mm Thickness per panel 25 mm 25 mm Gap between panels 50 mm 50 mm Mass per area – panel 33.0 kg/m² 20.6 kg/m² Mass per length...

 Open the catalogue to page 6

wall systems_2010.qxp:wall systems_2010 02.06.2010 19:05 Uhr Seite 13 Sandwich wall 25 – SW25NF Similar to image Sandwich wall 25 – SW25NF Similar to image 06_10 engl. The SW25NF wall panel system is a sandwich construction that combines a B-15 fire classification with a low weight. By using the tongue and groove principle with an integrated tongue on one panel side, the SW25NF wall panel reaches a mass of only 15.6 kg/m² without losing structural integrity. The connection to the floor is achieved by assembling prefabricated U-profiles that are fastened to the bottom construction. A large variety...

 Open the catalogue to page 7

wall systems_2010.qxp:wall systems_2010 02.06.2010 19:06 Uhr Seite 14 Sandwich wall 25 – SW25NF Sandwich wall 25 – SW25NF Sandwich wall 25 – SW25NF (single walls) Technical data Steel | Steel Steel | Aluminum Aluminum | or or Aluminum Wall Systems Stainless steel | Stainless steel Stainless steel | Aluminum Fire classification B-15 B-0 C Sound reduction according 30 dB --- --- Element width 250 – 650 mm 250 – 650 mm 250 – 650 mm Element length 1000 – 2475 mm 1000 – 2475 mm 1000 – 2475 mm Thickness 25 mm 25 mm 25 mm Mass per area – panel 15.6 kg/m² 12.0 kg/m² 8.2 kg/m² Mass per length – U-profile...

 Open the catalogue to page 8

wall systems_2010.qxp:wall systems_2010 02.06.2010 19:06 Uhr Seite 15 Double sandwich wall 25 – SW25NFP Similar to image Double sandwich wall 25 – SW25NFP Similar to image 06_10 engl. The SW25NFP double sandwich wall has been developed to meet very stringent noise-insulation requirements when two adjacent compartments need to be separated. By perforating the backsides of each panel, the double wall reaches a sound reduction of 45 dB and a B-30 fire classification status. Like the SW25NF wall panel, the SW25NFP system is based on the tongue and groove connection principle. The connection to the...

 Open the catalogue to page 9

wall systems_2010.qxp:wall systems_2010 02.06.2010 19:06 Uhr Seite 16 Double sandwich wall 25 – SW25NFP Double sandwich wall 25 – SW25NFP with 20 mm air gap Double sandwich wall 25 – SW25NFP Wall Systems Technical data Steel | Steel or Stainless steel | Stainless steel Fire classification B-30 Sound reduction according to DIN EN ISO 140-3 45 dB Element width 250 – 600 mm Element length 1000 – 2475 mm Thickness per panel 25 mm Gap between panels 20 mm Mass per area – panel 26.1 kg/m² Mass per length – U-profile 1.2 kg/m Density of insulation material 150 kg/m3 Coating PVC foil (others on request)...

 Open the catalogue to page 10

All R&M Marine Products catalogues and brochures

  1. R&M Accessories

    18 Pages

    En
  2. R&M Wall Systems

    25 Pages

    En
  3. Company brochure

    17 Pages

    En
  4. R&M Wet units

    8 Pages

    En
  5. R&M Marine Doors

    12 Pages

    En
  6. R&M Others en

    18 Pages

    En

Archived catalogues