R&M Product Catalogue Complete - 185 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

  16. P. 70

  17. P. 80

  18. P. 90

  19. P. 100

Catalogue excerpts

R&M Products Product Catalogue

 Open the catalogue to page 1

R&M Product Catalogue Wall Systems Ceiling Systems Floor Systems Marine Doors Marine Furniture Marine Cabins Wet Units Others

 Open the catalogue to page 2

R&M Wall Systems We differentiate between two different types of wall systems. In order to satisfy all the possible demands in the field of internal furnishings, several categories of these wall types are available, which can be configurated as single walls, double walls or multilayer walls. Each wall category has its application purpose and aim in order to precisely perform its task in the completion of the interior.

 Open the catalogue to page 3

Outer layer Current fire classification Sound reduction Steel | Steel Steel | Aluminum Aluminum | Aluminum 16.5 kg/m² 13.3 kg/m² 9.0 kg/m² Steel | Steel Aluminum | Aluminum Steel | Steel Steel | Aluminum Aluminum | Aluminum 15.6 kg/m² 12.0 kg/m² 8.2 kg/m² Steel | Steel Aluminum | Aluminum Steel | Steel Aluminum | Aluminum Steel | Steel Aluminum | Aluminum Steel | Steel Aluminum | Aluminum Assembly panel As an alternative to steel, our products are also available in stainless steel. In order to guarantee our customers maximum safety, all our products are tested in accordance with international...

 Open the catalogue to page 4

The SW25 sandwich wall is an alternative solution to the standard wall in situations where space and weight play important roles. It also has the B-15 fire classification. The assembly is based on the tongue and groove principle. The wall is connected to the floor using prefabricated U-shaped sections, available in a number of different lengths from the manufacturer. The sections are laid out and fastened onto the floor. A large variety of surface finishes are available; all of them have a removable protective foil to prevent any damage from occurring during installation. The design of the SW25...

 Open the catalogue to page 5

Sandwich wall 25 – SW25 Technical data Stainless steel | Stainless steel Wall Systems Stainless steel | Aluminum C (higher rating in progress) Sound reduction according Element width Element length Mass per area – panel Mass per length – U-profile (steel) Density of insulation material varnish coated varnish coated varnish coated (panel and tongue) Coating

 Open the catalogue to page 6

Double sandwich wall 25 – SW25 Double sandwich wall 25 – SW25 Besides the SW25 single walls, the R&M product range offers SW25 double walls as well. According to customer requirements, the double walls can be produced with steel or lightweight aluminum layers. Both variants are B-15 and B-30 fire rated, respectively. With a mass of only 20.6 kg/m², the aluminum version is especially used when the weight on board plays an important role. If the 50 mm air gap between the walls is filled with low density insulation, the sound reduction can be increased up to 42 dB. Like for the SW25 single walls,...

 Open the catalogue to page 7

Double sandwich wall 25 – SW25 Double sandwich wall 25 – SW25 with 50 mm air gap Double sandwich wall 25 – SW25 Technical data Wall Systems Stainless steel | Stainless steel Fire classification Sound reduction according Element width Element length Mass per area – panel Mass per length – U-profile Density of insulation material (panel and tongue) Coating varnish coated varnish coated Certification

 Open the catalogue to page 8

The SW25NF wall panel system is a sandwich construction that combines a B-15 fire classification with a low weight. By using the tongue and groove principle with an integrated tongue on one panel side, the SW25NF wall panel reaches a mass of only 15.6 kg/m² without losing structural integrity. The connection to the floor is achieved by assembling prefabricated U-profiles that are fastened to the bottom construction. A large variety of surface finishes are available; all of them have a removable protective foil to prevent any damage from occurring during installation. The design of the SW25NF wall...

 Open the catalogue to page 9

Sandwich wall 25 – SW25NF (single walls) Technical data Wall Systems Stainless steel | Stainless steel Stainless steel | Aluminum Fire classification Sound reduction according Element width Element length Mass per area – panel Mass per length – U-profile (steel) (higher rating in progress) to DIN EN ISO 140-3 Density of insulation material (panel and tongue) Coating varnish coated varnish coated varnish coated (others on request) Certification

 Open the catalogue to page 10

Double sandwich wall 25 – SW25NFP Double sandwich wall 25 – SW25NFP The SW25NFP double sandwich wall has been developed to meet very stringent noise-insulation requirements when two adjacent compartments need to be separated. By perforating the backsides of each panel, the double wall reaches a sound reduction of 45 dB and a B-30 fire classification status. Like the SW25NF wall panel, the SW25NFP system is based on the tongue and groove connection principle. The connection to the floor is achieved by assembling prefabricated U-profiles that are fastened to the bottom construction. A large variety...

 Open the catalogue to page 11

Double sandwich wall 25 – SW25NFP Double sandwich wall 25 – SW25NFP with 20 mm air gap Double sandwich wall 25 – SW25NFP Wall Systems Technical data Steel | Steel or Stainless steel | Stainless steel Fire classification Sound reduction according to DIN EN ISO 140-3 Element width Element length Mass per area – panel Mass per length – U-profile Density of insulation material PVC foil (others on request) varnish coated

 Open the catalogue to page 12

Standard corner panels – SW25/SW25NF Standard corner panel – SW25 Standard corner panel – SW25NF Standard corner panel – SW25NF The 25 mm-thick corner panels can be fitted into the wall panels SW25 and SW25NF to form a flush connection. This ensures an excellent finish, especially in areas with high aesthetic requirements, as there is no joint where the two panels meet. In addition to the standard dimensions of 150 mm per side and an angle of 90°, other dimensions and angles can be produced on request. A large variety of surface finishes are available; all of them have a removable protective foil...

 Open the catalogue to page 13

Standard corner panels – SW25/SW25NF Standard corner panel – SW25 Standard corner panel – SW25NF Standard corner panels – SW25/SW25NF Technical data Stainless steel | Stainless steel Fire classification Element width – side a other sizes according to other sizes according to customer specification customer specification Wall Systems (higher rating in progress) Element width – side b other sizes according to other sizes according to customer specification customer specification Element length Angle between sides other angles according to other angles according to customer specification customer...

 Open the catalogue to page 14

All R&M Marine Products catalogues and brochures

  1. R&M Accessories

    18 Pages

    En
  2. R&M Wall Systems

    25 Pages

    En
  3. Company brochure

    17 Pages

    En
  4. R&M Wet units

    8 Pages

    En
  5. R&M Marine Doors

    12 Pages

    En
  6. R&M Others en

    18 Pages

    En

Archived catalogues