PHOTO GALLERY CONT.

40-70HP

SRD4 – 11.25” DIAMETER – AVAILABLE IN 12-17” PITCH, 4 BLADES, RIGHT HAND ROTATION, AN ALL AROUND 4 BLADE FOR 50-60HP MOTORSSCA3 - 11.00” DIAMETER, AVAILABLE IN 13-15” PITCH, 3 BLADES, RIGHT HAND ROTATION, A LARGER DIAMETER VERSION OF SCB TO HANDLE HIGHER HORSEPOWER OR HEAVIER LOADSSRC3 - 10.75” DIAMETER, AVAILABLE IN 11-12” PITCH, 3 BLADES, RIGHT HAND ROTATION, AN ALL AROUND LOW PITCH 3 BLADESCH3 – 11.25” DIAMETER, AVAILABLE IN 12-14” PITCHES, 3 BLADES, RIGHT HAND ROTATION, A LOW RAKE, UNCUPPED, SWEPT SEMICLEAVER, GOOD STERNLIFT, EXCEPTIONALLY EASY TO TURN, AN EXCELLENT PROP IF RUN SUBMERGED AND HIGH TRIM ANGLE IS NOT NEEDED. A FACTORY REPLACEMENT FOR THE HONDA 35-50 HP ALUMINUMWBG3 – 11.62” DIAMETER, AVAILABLE IN 9-11” PITCH, 3 BLADES, RIGHT HAND ROTATION, MARINE THRUSTER SERIES LOAD PUSHING PROPS, WIDE BLADE, FOR WORK BOAT AND PONTOON BOATSILC – 11.25” DIAMETER, AVAILABLE IN 11-14” PITCH, 3 BLADE, RIGHT HAND ROTATION, NO CUP, GOOD FOR SUBMERGED APPLICATIONS, WILL NOT WORK PROPERLY IN VENTILATING CONDITIONSOLC – 11.75-12.25” DIAMETER, AVAILABLE IN 13, 15, 17” PITCH, 3 BLADE, RIGHT HAND ROTATION, NO CUP, GOOD FOR SUBMERGED APPLICATIONS, WILL NOT WORK PROPERLY IN VENTILATING CONDITIONS WBA3 – 12.00” DIAMETER, AVAILABLE IN 9-13” PITCH, 3 BLADES, RIGHT HAND ROTATION, THRUSTER SERIES, LOAD PUSHING, WIDE BLADE, GREAT FOR WORK BOATS AND PONTOON BOATSSRG3 – DIAMETER VARIES WITH PITCH FROM 11.75 TO 12.50”, AVAILABLE IN 11-17” PITCH, 3 BLADES, RIGHT HAND ROTATION, SST EQUIVALENT, 20 DEGREES RAKE, EXCELLENT ALL AROUND PROPSRD3 - 11.25” DIAMETER, AVAILABLE IN 11-17” PITCH, 3 BLADES, RIGHT HAND ROTATION, BEST ALL-PURPOSE PROP, 20 DEGREES RAKE, EXCELLENT ALL AROUND PROPSCB3 - 10.375” DIAMETER, AVAILABLE IN 12-17” PITCH, 3 BLADES, RIGHT HAND ROTATION, SPEED PROPELLER, EXCELLENT STERNLIFT, GREAT PERFORMANCE, GOOD ON INFLATABLES AND FLAT BOTTOM HULLSSCB4 – 10.375” DIAMETER, AVAILABLE IN 12-17” PITCH, 4 BLADES, RIGHT HAND ROTATION, EXCELLENT CORNERING AND HOLE SHOT, TERRIFIC MID RANGE, A PREFERRED CHOICE ON INFLATABLES AND FLAT BOTTOMSSWC3 – 10.75” DIAMETER, AVAILABLE IN 12-14,” PITCH, 3 BLADES, RIGHT HAND ROTATION, REALLY EXCEPTIONAL GRIP, WILL CONTROL SLIPPAGE WITH TIGHT RADIUS, CUP, GOOD ON PONTOONS AND SINGLE ENGINE CATAMARANSSWC4 – 10.75” DIAMETER, AVAILABLE IN 12-14” PITCH, 4 BLADES, RIGHT HAND ROTATION, SAME AS 3 BLADE BUT EVEN MORE RESISTANCE TO SLIPPAGE

CALL FOR SPECIAL BLADE STYLES OR PITCHES NOT LISTED1-800-736-7767

33