Catalogue Spring 16-page supplement
www.plastimo.com
print switch display
Page / 15
Plastimo - 18159, 4942, 17088, 16247
/ 15
See other catalogues for Plastimo
Text version of the page
Line clutch
Lines capacity : 12 mm max. Holding power : 550 kg.
Model
Reference
Length
Width
Height
Weight
Single clutch
186810
133 mm
38 mm
68 mm
343 g
Double clutch
56992
133 mm
65 mm
68 mm
544 g
Triple clutch
56993
133 mm
91 mm
68 mm
754 g
Pack of printed clutch handle inserts 186811
Printed removable inserts for clutch labelling. Pack of 7 inserts, featuring the following mention Main, Genoa 1, Spin Halyard 1, Topping Lift, Spin pole up, Spin pole down + 1 blank insert.
Backstay tensioner marine block
Suitable for tensioning split or twin backstays to control the mast rake. Stainless steel cheeks.
56995
Reference
Brass sheave
0
Weight
56995 56996
35 x 8 mm 50x 15 mm
5 mm max. 10 mm max.
277 g 585 g
Mow- m colour
56303
Pingi moisture-absorber is a simple, eco-friendly and money-saving solution protecting your boat from the effects of excess humidity. It purifies closed spaces by reducing the relative humidity of ambient air. Pingi dehumidifier leaves no chance to moistures, preventing the development of stains and musty odours.
Non-toxic : because Pingi is totally safe, it can be used anywhere, even in spaces where children and pets are used to play.
• Ready-to-use : Pingi does not require any electrical power.
• Money-saver : it is endlessly reusable. • Eco-friendly : it never leaks or overflow. It does not need to be re-filled.
Functioning :
The granules absorb humidity and hold it until saturation. The boat printed on the face of the bag changes from blue to pink when the dehumidifier reaches its saturation point. Pingi moisture-absorber can be recharged by simply placing it in the microwave oven for 8-15 minutes max. It releases its water vapour and can be used again.
Performance Marine antifouling
• High performance, with gradual polishing ratio, for sail and power boats (< 40 knots), except aluminium hulls.
• High fouling areas.
• Suitable for drying berths.
• Good compatibility.
• Coverage ratio : 8.80 m2/litre.
• Minimum temperature during application : + 5°C. In 20°C ambient temperature, wait 2 1/2 hours before overcoating and 4 hours before launching.
• Absorbing material : SiO2 granules.
• Begins to work at approx. 55 % humidity.
• Absorption capacity : 200cm3/20cl.
• Recommended volume : 1 Pingi bag for a 3 to 4-sqm space.
0.75 L
2.5 L
5 L
56062
56063
56064
Colour ft Green
l&
PLASTIMO
NauticExpo's Virtual Library: PDF Catalogues | Documentation | Boating Brochures | Manuals | Marine directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14
page 15 p.15