| | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | With its weighted tip and very broad shoulders, the Kobra anchor bites into the seabed within seconds and has a very high holding power. For winterizing, unbolt the shank before folding it. It will ease the stowage of the anchor in its compartment. Before using the anchor again, relock the shank in position with a well gripped new nylock nut. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | Main anchor | Second anchor | Ref. | Weight | Dimensions (mm) | | | | Kg | Lb | A | B | C | D | E | F | G | | | | 9 m | 13 m | 56892 | 12 | 26.5 | 739 | 341 | 305 | 452 | 36 | 16 | 14 | | | | 10.5 m | 14.5 m | 56893 | 14 | 30.8 | 789 | 361 | 330 | 500 | 40 | 18 | 14 | | | | 12.5 m | 16 m | 56894 | 16 | 35.3 | 815 | 374 | 340 | 503 | 40 | 18 | 14 | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Fleece-covered flat fender Ideal to moor alongside another boat, this flat fender also offers optimum protection when against quays or piers. Made from polystyrene foam with outer white PVC cover, it features a soft fleece-covered facing, to prevent scratches on the null. Those models can be positioned either vertically or horizontally and fasten easily together with a lanyard (not supplied). With its comfortable fleece cover on one face, the flat fender can also be used as an extra knee-pad, seat cushion or back supporter. The cover is washable and removable for easy maintenance. | | Steering wheel cover Available in 4 sizes, this cover fully protects the steering wheel against external assaults. Made from stylish acrylic Dralon, for the cosiness and lightweight only a canvass fabric can offer. Dralon fabric breathes which provides perfect ventilation and helps avoiding condensation or mildew. This cover is impervious to UV-rays, mildew and water treated (Scotchguard). Royal blue colour. Easy to wash in soapy water. | | |
| | | |
| | | | | | | | | | Reference | Diameter | | | | 56954 | 830 mm | | | | 56955 | 930 mm | | | | 56956 | 1130 mm | | | | 56957 | 1230 mm | | | | | | | | | |
| | | |
| | | | | | | | | | | | Reference | Length | Width | Thickness | | | | 56922 56923 | 60 cm 60 cm | 20 cm 40 cm | 10 cm 10 cm | | | | | | | | | | | |
| | | |
| | | Bimini tops adapt on virtually all open-hull type boats, either rigid or inflatable. Very easy to install : it takes a minute to put up and take down the bimini when not in use. Particularly enjoyable when mooring and equally pleasant when sailing, it provides efficient protection against the sun for both pilot and crew. • 3-arches 17 x 20 mm aluminium frame, white lacquer finish. • Waterproof polyester 600 PVC-coated white fabric, nylon and fibreglass fittings. • Maximum speed of use : 20 knots. | |
| | | |
| | | | | | | | | | | | Reference | Width | Length | Height | | | | 57019 | 150 cm | 180 cm | 110 cm | | | | 57020 | 170 cm | 180 cm | 140 cm | | | | 57021 | 200 cm | 180 cm | 140 cm | | | | 57022 | 225 cm | 180 cm | 140 cm | | | | | | | | | | | |
| | | Suction disc : 56023 For installation on a RIB or pneumatic boat. 2 suction discs are necessary by bimini. | | |
| | | |
| | | |
| | | 12 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | |