Flexible Tanks

F
ILLING AND PUMPING FROM ABOVE THE TANK When the tank is free and flat, pumping is done by suction. There is no air in the flexible tank. Straight nipples are usedfor flexible pipes arriving vertically. F
ILLING AND PUMPING WITH A BENT NIPPLES (45°) For flexible pipes arriving horizontally. I
NSTALLATION OF TWO OR MORE TANKS AT THE SAME LEVEL Each tank is connected directly to the pump and the drain with the aid of tees (parallel installation). P
UMPING T
HROUGH THE FILLING CIRCUIT Connect the tee piece (35 mm x 15 mm x 35 mm) to the 35 mm flexible pipe at the base of the tank. Join the 15 mm pump pipe to the corresponding section of the tee. S
TARBOARD AND PORT TANKS In order to prevent the tanks from emptying into one another, a needle valve is place at the center point of the pipe connecting the tanks.

384, rue d’Alger – B.P 89 Tel : 33 (0)3 20 11 36 00 59052 ROUBAIX CEDEX Fax : 33 (0)3 20 11 36 71 Web : pennel.fr E- mail : nauta@pennel.fr