Flexible tanks and fettings
10Pages

{{requestButtons}}

Catalog excerpts

Flexible tanks and fettings - 2

The Flexible Tank The technique of storing and transporting liquids through the use of flexible tanks has many advantages : • lightness • handiness • adaptability • fiability NAUTA® FLEXIBLE TANKS provide many advantages over rigid tanks and have therefore, become very popular with both yacht-builders and boat owners. Each of these tanks uses an extremely rugged 935-dtex nylon fabric, coated on both sides with a neoprene / nitrile compound. Heavily lapped seams are inside-reinforced with a “doubler" to provide extra strength. All NAUTA® tanks are vulcanised to assure leakproof panels and...

Open the catalog to page 2
Flexible tanks and fettings - 3

1. Deck plug filler 2. Filler tube 3. Vent 4. Valve 5. Fuel line 6. Fuel Filter 7. Flexible fuel line 8. fuel line bracket 9. fuel line connector 10. Bolt 11. Earth (example of installation for a gasoline engine) NAUTA® flexible gas tanks can dramatically extend the range of powered sail and motor boats. They can be deck or cockpit mount to gravity feed ( or be hand-pumped) to tankage below decks. And. when empty, these tanks can be rolled up and stowed. Sport and commercial fishermen heading into offshore waters and cruisers visiting remote ports (where refuelling may be unavailable or...

Open the catalog to page 3
Flexible tanks and fettings - 4

Diverter valve toilet pump NAUTA® flexible holding tank The more rigorously enforced laws against overboard discharge now make non-compliance extremely costly. A NAUTA® flexible holding tank, on the other hand, provides a relatively inexpensive Type III solution. In addition, the Teldar™ lining of these NAUTA® tanks prevents gas permeation, thus stopping a major odour problem with many other holding tanks. Combined with a few other components, this solution is both legal and far less costly than replumbing a vessel or installing a more complex and expensive Type I or Type II system : it...

Open the catalog to page 4
Flexible tanks and fettings - 5

Installation tips It is advisable to install your NAUTA® flexible tank in a small “berth" which will help to insure its protection against sharp objects. This berth prevents abnormal wearing from abrasion. Figure hose lengths with tank empty, and allow sufficient slack. Use grommets for positioning only, not for supporting a loaded tank. When securing, it is important to remember that tanks expand when loaded; a loose fit in the deflated state or elastic tie-downs will work best. Additional fittings We have designed a comprehensive range of nylon fittings to be used only on NAUTA® tanks....

Open the catalog to page 5
Flexible tanks and fettings - 6

Belgique Web site: www.orca.e

Open the catalog to page 6
Flexible tanks and fettings - 7

FLEXIBLE TANKS AND FITTING RESERVOIRS EAU DOUCE, EAU POTABLE OU EAU USEE FLEXIBLE TANKS FOR FRESH WATER, DRINKING WATER OR HOLDING WATER

Open the catalog to page 7
Flexible tanks and fettings - 8

FLEXIBLE TANKS AND FITTING

Open the catalog to page 8
Flexible tanks and fettings - 9

RESERVOIRS POUR EAU FLEXIBLE WATER TANKS REFERENCE 520 210 CAPACITY 150 LITRES

Open the catalog to page 9
Flexible tanks and fettings - 10

FLEXIBLE TANKS AND FITTING RESERVOIRS POUR CARBURANTS ET LUBRIFIANTS

Open the catalog to page 10

All ORCA / Pennel & Flipo catalogs and brochures

Archived catalogs

  1. Orca Boom

    10 Pages