video corpo

SCH-R Serie - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

TECHNICAL SPECIFICATION – SCH-R Serie PALFINGER NED-DECK Optional: Paint System Optional: CAR 35 Stainless steel automatic off-load release hook Remote control - Lowering Remote control - Slewing Electric driven winch - SOLAS Accumulator(s) - (Stored power) Stainless steel Hydraulic Power Unit (HPU) Rotating column Optional: Pedestal Compact design. Small footprint, for easy installation onboard Delivered as a "plug and play" unit, ready for immediate use Stainless steel HPU (hydraulic power pack unit) is included; all critical components are fully submerged in hydraulic oil 5. Stainless steel for all shafts, piping and bolts and nuts up to M12 6. Easy access for periodic maintenance, service and repair, support by with clear labelling and detailed manuals 7. Relatively low davit weight and deck forces RESCUE BOAT HYDRAULIC SLEWING DAVIT Doc. Nr. PALFINGER NED-DECK reserves the right to change the specification without prior notice.

 Open the catalogue to page 1

TECHNICAL SPECIFICATION – SCH-R Serie PALFINGER NED-DECK TECHNICAL DESCRIPTION 1. GENERAL INTRODUCTION The PALFINGER NED-DECK hydraulic slewing davits have been designed for long time operation under adverse and extreme conditions in a highly corrosive marine environment. The hydraulic slewing davits of the SCH-R series are so-called “plug-in and play units” all guaranteeing easy installation on board. The SCH-R davit is a freestanding deck mounted davit consisting of a davit arm, column, winch and built-on hydraulic power pack unit. The system is suitable for safe and efficient launching and...

 Open the catalogue to page 2

TECHNICAL SPECIFICATION – SCH-R Serie PALFINGER NED-DECK 5. HYDRAULIC POWER PACK UNIT (HPU) The hydraulic power pack unit consists of the following main components:      • • Stainless steel hydraulic tank (AISI 316) with drain valve; Hydraulic pump; Electric motor; Pressure switches; Pressure relief valve; Control valve; Accumulator 6. ACCESSORIES Each davit system will be supplied with the following accessories: ELECTRIC CONTROLS  Motor starter built onto the davit arm and provided with main switch, push button and “power on” indicator;  Limit switch WIRE ROPE  Galvanised non-rotating...

 Open the catalogue to page 3

TECHNICAL SPECIFICATION – SCH-R Serie PALFINGER NED-DECK 11. APPROVALS AND CERTIFICATES The davit is supplied with the following test certificates:  Davit type approval certificates are issued by class, according IMO/SOLAS, LSA Code and EC/MED;  Davit factory acceptance test certificate issued by class  Winch factory acceptance test certificate issued by class  Wire certificate  Hook certificate (if hook included in scope of supply) Copies of the relevant approvals and certificates are included in the instruction, maintenance and operations manual of the davit

 Open the catalogue to page 4

All Palfinger Marine GmbH catalogues and brochures

  1. FFH Series

    3 Pages

    En
  2. Services

    16 Pages

    En

Archived catalogues

  1. Wind Cranes 2014

    9 Pages

    En
  2. Wind Cranes

    12 Pages

    En