water senders
2Pages

• No moving parts to stick or fail • Self Calibrating • Tank Depths from 200mm to 2Mtr • Fresh Water, Grey Waste Water or Black Waste Water Senders • Up to 16 of each type of sender on a single network • Low Top Profile and Easy to Install • Robust Stainless Steel Construction Fresh Water, Grey Water & Black Water Level Senders 3281 Water Level Senders are available for Fresh Water, Grey Waste Water and Black Waste Water Tanks. They provides a ±2% accurate tank level to the NMEA2000® marine network. They are robustly constructed in stainless steel with no moving parts to stick or fail in service. They are easily cut to length to suit tank depths from 250mm to 2 metres and are self calibrating They are easily fitted in the tank using a single 1.25" BSP threaded hole or into the standard SAE 5 bolt fitting by using the SAE 5 Bolt to 1.25" Sender Mounting Ring supplied. Up to 16 of each type of sender can be connect- ed to a single network and the tank number is simply selectable at installation by means of the small rotary switch. It is certified to the NMEA2000® network stand- ard and attaches to the network using a single "Micro" plug. It draws less than 50mA from the

NMEA2000® Fresh, Grey & Black Water Level Senders 3281 Water Sender Dimensions Adaptor Ring Dimensions Dimensions in millimetres except where indicated The inclusion of any vessels in any picture does not infer that their manufacturer endorses this product. Our policy is one of continuous product improvement so product specifications are subject to change without notice. Our products are designed to be accurate and reliable, however, they should only be used as aids to the safe management of the boat and not as a replacement for traditional aids and techniques. Copyright © 2008 Offshore...