DO NOT SCALE IF IN DOUBT ASK NOTE (9") 75mm(3") MAX. HULL THICKNESS ALL MODELS 29 (1 1/8")

24

90

60 M 115 (4.5")

(1.4") 13034

24 M 135 (5.2")

30 (1.2") 130 38 OPTIONAL DELRIN ISOLATING SLEEVE

137

2010 THRU HULL1520 THRU HULL 3010 THRU HULL4010 THRU HULL 1010 THRU HULL

FOR USE ON METAL HULLS

(5.4")

35 AVAILABLE FOR ALL (1.4) MODELS 130 190

24 M 158 (6.2") 24

(1.5") 90

M 76 200 (7.9") 36 M

220 (8.625")

GEOMETRIC CHARACTERISTIC SYMBOLS

TITLE

STRAIGHTNESS PROFILE OF A ANGULARITY RUN

ALL DIMENSIONS ARE IN MILLIMETERS THIS DRAWING IS THE PROPERTY OF

Ocean LED

LINE OUT

Ocean LED LTD.

THRU-HULL LIGHT RANGE

PROFILE POSITION BASIC

TOLERANCES ON CASTINGS, UNMACHINED COPYRIGHT IS RESERVED BY THEM.

FLATNESS OF A 32

21 Ptarmigan Place

Ltd.

SURFACE DIMENSION

PARTS AND FABRICATIONS, +/- 0.8 THE DRAWING IS ISSUED UNDER THE

Attleborough Fields Ind. Est.

MAXIMUM

TOLERANCES ON MACHINED DIMENSIONS CONDITION THAT IT MUST NOT BE USED

ROUNDNESS PARALLEL- CONCENT-

MATERIAL SPEC

Tel. 02476 371700 Nuneaton

ISM RICTY

M

MATERIAL

WHOLE UNITS +/- 0.25 FOR ANY PURPOSE OTHER THAN WHICH

CONDITION

ONE DEC. PLACE +/- 0.1 IT IS SUPPLIED AND NOT BE COPIED,

Fax. 02476 374840 CV11 6RX

CYLIND- SQUARENESS SYMMETRY

A

DATUM

TWO DEC. PLACE +/- 0.05 REPRODUCED, RETAINED OR

RICITY

HEAT TREATMENT

www.oceanled.com

SHEET ANGLES +/- 0.5 DEG. DISCLOSED TO UNAUTHORISED PERSONS WHOLLY OR IN PART

1 of 1

FINISH ISSUE

THIRD ANGLE

ALL UNSPECIFIED CHAMFERS 1 x 45 WITHOUT THE CONSENT IN WRITING OF DRAWING NUMBER BREAK ALL SHARP EDGES 0.1 TO 0.5 Ocean LED LTD.

PROJECTION

DRAWN

sant

DATE SCALE

27/07/2007 1:8

TH-001 A3