DO NOT SCALE IF IN DOUBT ASK

(6feet) 1800mm 22.5 (7/8") 22.5 (7/8")

50 82

21.5

50 (3 7/32")

(27/32")

(2") (2") No.8 Screw No.8 Screw No.6 Screw x2 x2 x4

63 63 182 155 (2 1/2") (2 1/2") (5 1/8") (7 11/64") 92 76 (3") (3 5/8")

34 (1 11/32") 65 (2 9/16") AMPHIBIAN 3 AMPHIBIAN 6 AMPHIBIAN 12 note: all Amphibian marine lights have onboard drivers and are supplied with 1800mm(6ft) of cable & fixing screws

GEOMETRIC SYMBOLS THIS DRAWING IS THE PROPERTY OF TITLE

STRAIGHTNESS PROFILE

ALL DIMENSIONS ARE IN MILLIMETERS

OF A ANGULARITY RUN

Ocean LED LTD.

Ocean LED

LINE OUT

TOLERANCES ON CASTINGS, UNMACHINED

COPYRIGHT IS RESERVED BY THEM. THE DRAWING IS ISSUED UNDER THE

Amphibian Range

PROFILE POSITION BASIC

Ltd

FLATNESS OF A 32 DIMENSION

PARTS AND FABRICATIONS, +/- 0.8

CONDITION THAT IT MUST NOT BE USED 21 Ptarmigam Place

SURFACE

TOLERANCES ON MACHINED DIMENSIONS

FOR ANY PURPOSE OTHER THAN Attleborough Fields Ind. Est. WHICH IT IS SUPPLIED AND NOT BE MATERIAL SPEC

ROUNDNESS PARALLEL- CONCENT- MAXIMUM ISM RICITY

M

MATERIAL

WHOLE UNITS +/- 0.25

NUNEATON

CONDITION

ONE DEC. PLACE +/- 0.1

COPIED, REPRODUCED, RETAINED OR Tel. 02476 371700 Fax. 02476 374840 CV11 6RX

CYLIND- SQUARENESS

DISCLOSED TO UNAUTHORISED PERSONS

SYMMETRY

WHOLLY OR IN PART WITHOUT THE HEAT TREATMENT

RICITY

A

DATUM

TWO DEC. PLACE +/- 0.05

www.oceanled.com

SHEET

ANGLES +/- 0.5 DEG.

CONSENT IN WRITING OF Ocean LED LTD. FINISH

1 of 1 THIRD ANGLE ALL UNSPECIFIED CHAMFERS 1 x 45

DRAWING NUMBER revision

PROJECTION BREAK ALL SHARP EDGES 0.1 TO 0.5

DRAWN

sant

DATE SCALE

10/03/2008 1:2.5

AMPH 3-6-12_001

A4