| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Page lof 2 | | |
| | | Lloyd's Register EMEA (London Office) LONDON PLAN APPROVAL/DESIGN APPRAISAL 71 Fenchurch Street, London, EC3M 4BS Telephone 020 7709 9166 Fax 020 7488 4796 Email tad@lr.org | | |
| | | lugger | | |
| | | |
| | | Document number 06/00038 | | |
| | | |
| | | Issue number 1 | | |
| | | |
| | | |
| | | |
| | | DESIGN APPRAISAL DOCUMENT | | |
| | | |
| | | Date 01 May 2006 | | Quote this reference on all future communications LPA/DAPP/ECE/TA/W00977512/MHR/O- 70427 | | |
| | | |
| | | |
| | | LLOYD'S REGISTER TYPE APPROVAL SYSTEM, 2002. Issued to: OCEAN-LED for: UNDERWATER LIGHTS Type: SERIES 1000, 2000 AND 3000 TYPE APPROVAL CERTIFICATE No. 06/00038 | | |
| | | |
| | | The undernoted documents have been reviewed for compliance with the requirements of the Lloyd's Register Type Approval System, 2002 and this Design Appraisal Document forms part of the Certificate. | | |
| | | |
| | | APPROVAL DOCUMENTATION Request form Ocean-LED letter LR Liverpool fax message Ocean-LED Installation Manual Ocean-LED Thru Hull | | |
| | | 02.09.2005 03.09.2005 18.04.2006 03.2006 Undated | | |
| | | |
| | | Data Sheets Ocean-LED Advertising and Literature Ocean-LED Products Thermally Conductive Epoxy Twin Pack (CP0122 v2.0 RS 160-8469,552-668) Loctite (CP0126 v3.0 RS 408-4169,409-1476,448-4547,454-7452,496-091,514-587) Epoxy Potting Compound (CP0237 v2.0 RS 199-1468) Polyurethane Resin UR5041 (CP0380 v2.0 RS 160-8481) Permabond (UV610) Multicore Solders (CP1040 vl.O RS 184-9985,184-9991) IPA Aerosol (CP0430 v2.0 RS 389-1792,693-775) Techcon (TSI0256B) Thermally Conductive Epoxy -White (CP0815 v.2.0 RS 422-8218) TEST REPORTS Hydrostatic Pressure - FLUKE. Logging Form (Fluke 189 V2.02 0088980047) LR Liverpool inspection report (W00977512) Supplementary Type Approval. Terms and Conditions | | |
| | | 18.01.2006 05.09.2005 01.10.2003 15.08.2003 01.10.2003 01.10.2003 21.02.2006 13.10.2004 01.07.2003 04.10.2003 01.10.2003 | | |
| | | |
| | | 07.04.2006 07.04.2006 | | |
| | | |
| | | |
| | | Type Approval, certifies that a representative sample of the prodttct(s) referred to herein has/have been found to meet the applicable design criteria for the use specified herein. It does not mean or imply approval for any other use, nor approval of any product(s) designed or manufactured otherwise than in strict conformity zuith the said representative sample. Type Approval is based on the understanding that the manufacturer's recommendations and instructions and any relevant requirements of the Rules and Regulations are complied zuith. | | |
| | | |
| | | Lloyd's Register, Its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register Group'. The Lloyd's Register Group assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information "or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register Group entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |