Important

- Never launch or land your boat kite with your top stopper under tension. Always have it punched up into free ride mode to give you full depower in the event of a gust. [

Note

- The upper bar stopper can be tensioned to a point that it cannot be punched-up into free ride mode. This feature is for advanced riders only who want full power on the bar stopper. Manual Release from Trim Loop: The manual release is activated by grasping the “Eject” release cuff and then pushing it away from you. This will release the kite from you and activate the front line leash. [

22

] TIP for NOVICE: Cutting the melted tip off the lower end of the plastic connection rod between the upper and lower stopper balls will allow you to easily remove this connection. Once removed, slide the upper stopper up and off the plug in the trim line. This will allow maximum de-power of the kite while learning. Later, you can easily re-connect the stoppers by re-inserting the plastic rod and melting its end to hold it in place. [

24

] [

25

] [

26

]

23 23

]

24 25 26 15