Leading edge bladder removal

1 Get two lines each approximately 2/3 the length of the leading edge tube
2 Open the Velcro at the tip of both ends of the LE tube. Gently pull a bit of the bladder out and tie one line each to the 2 ends of the bladder [
15 ]
3 Have a friend hold the wingtip (or use weight)
4 Gently push the two valves into the leading edge tube [
16 ]
5 Open the zipper and gently remove the bladder [
17 ]
6 Disconnect the lines from the bladder but be sure to leave them threaded in the LE tube.
13 7 (see Bladder Repairs above)
14 24