| | | 5.The rear lines connect to the kite with a foolproof connector that prevents the front and back lines from being incorrectly attached. [13] • Remove the pigtail from the fool proof connector and loop it through the end of your rear flying line [14] • With the pigtail now attached to your back lines pass it through the fool proof connector (lark's head knot.) Use the second knot up from the end. [15] 6. Make a final inspection of your bar system. j4___ | | Important If you are using an Ocean Rodeo Punch UP bar with your flat kite make sure your Punch UP stopper is in "free ride mode" with the thumb screw complelely backed off and the upper stopper pushed above the internal line plug. This will allow the bar to freely slide up the front lines and de-power the kite in the event of a gust during launch. [16] | | |