9 pages in the catalogue
Board |
 |
Board p 1 Ocean Rodeo Board Assembly 1. Check the fit of the fin against the board. The fin should sit flush against the board. ** Note orientation of the fin. 2. If needed tighten the 2 small bolts on individ... |
 |
Board p 2 5. Peel back the first ½ of the paper backing on the stick down pads, just past the insert holes. 6. Position pad on deck so that the holes in the pad line up with the inserts on the board. Be careful... |
 |
Board p 3 8. Press down on entire pad to properly secure. Again, be sure to give attention to the edges of the deck pad. 9. Repeat steps 4 to 8 for the second pad. 10. Use flat topped, counter sunk, bolts to at... |
 |
Board p 4 12. Now pass the bolt through the second set of webbing on the bottom of the foot strap. 13. Correctly align the foot straps on the board. ** Note orientation of straps. 14. Screw foot straps to board... |
 |
Board p 5 Ready To Go! Ocean Rodeo Sports Inc. 6820 Kirkpatrick Cres. Saanichton, BC V8M 1Z9 Info@OceanRodeo.com - 250-544-4969 – OceanRodeo.com ... |
