TEPSS - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

E LECTRONIC MARINE SOLUTIONS TEPSS is a device designed to release a sheet or any rope remotely by a simple electric impulse related to a pneuma c distributor. The TEPSS range offers the following func ons : • Remote release of a held rope • Manual release of the held rope TEPSS Electro-pneuma c snap shackle with load cell op on • Strength measurement on the held rope • Swivel • Autonomous in compress air thanks to a reloadable accumulator which can be inflated with a bicycle pump. The air pressure can also be maintain automa cally with a compressor. • Manual (trigger of the snap shackle) or electric release (through a 12vdc, 24vdc, 110vac, 220vac impulse). • Load cell op on allowing to measure the strain on the held rope. 100% ompatible c The three available sizes are derived from Tylaska T8, T20 and T30 snap shackles from which they inherit the characteris cs of mechanical resistance. • Available in three sizes (T8, T20, T30). Other models available on request. • Each size is available with three shackle types (standard bails, large bails or clevis bails with swivel). • Available with three air supply capaci es : 0.1L, 0.4L, 0.75L • The air pressure available is shown on a pressure gauge. A low pressure alarm feature is available as an op on. • The electric supply is applied to the pneuma c distributor. No electric component in the TEPSS itself except for loadcell op on. Some common applications : • Fixed point of the mainsail sheet’s or vang’s tackle, • Fixed point of the mainsail’s traveller, • Self tacking jib’s sheet, • Man Over Board unit, • Martin breaker, … • Industry, handling, impact tests, ... ODSDEVELOPMENTS solution Design : Ocean Data System 11/2015 - Non contractual document: all information and illustrations are subject to change without prior notice. Can not be altered or reproduced without Ocea

 Open the catalogue to page 1

TEPSS range Control units Pneumatic features Functions Pneumatic release - Swivel Pneumatic release - Loadcell - Swivel Loadcell - Swivel - Manual Snap shackle Loadcell - Swivel LC Dimensions With large bail Environmental features Protection rate Working temp. Breaking strength TEPSS range Service pressure Loadcell features Static overload Supply voltage range Output signal Linearity Hysteresis Compensated temp. range 0°C to +60°C Zero shift within CTR < 0.5% full scale / 50°C Sensitivity shift within CTR < 1.5% of reading / 50°C info@oceandatasystem.com www.oceandatasyste

 Open the catalogue to page 2

All Ocean Data System catalogues and brochures

  1. NISE106

    2 Pages

    En
  2. LANNER LEC-7070

    2 Pages

    En
  3. ODLIGHT STANDARD

    2 Pages

    En
  4. ECB

    2 Pages

    En
  5. ILSense

    1 Pages

    En
  6. BCam

    2 Pages

    En
  7. ODSpots

    2 Pages

    En
  8. UpSideUp Easy

    2 Pages

    En
  9. UpSideUp Master

    2 Pages

    En