Catalogs >
Norglass >
Weatherfast Marine Varnish

Weatherfast Marine Varnish
2Pages

Catalog excerpts

WEATHERFAST MARINE VARNISH JULY 2014 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: norglass@bigpond.net.au www.norglass.com.au WEATHERFAST MARINE VARNISH DESCRIPTION: A clear, low odour high gloss alkyd finish with high levels of ultra violet inhibitors and stabilizers for maximum exterior protection. Panelling, doors, outdoor furniture, railings, general brightwork on boats and all areas not subjected to heavy traffic. Light amber High Gloss DRYING TIME: After 16 hours at 50% relative humidity MIXING RATIO: Not normally recommended, but up to 3% WEATHERFAST BRUSHING THINNER can be added to improve flow in hot weather. VOLUME SOLIDS: FLASH POINT: WEATHERFAST BRUSHING THINNNER

Open the catalog to page 1

WEATHERFAST MARINE VARNISH PREPARATION: New bare timber must be dry, well sanded and have the dust particles within the grain removed by clean rags soaked in NORCLEAN-PLUS. Previously varnished timber (in good condition) should be sanded thoroughly to a flat state then wiped over with a lint-free cloth in NORCLEAN-PLUS. Cracked or peeling varnishes must be totally removed back to a clean dry timber state. The first coat should be applied by brush to work the product into the timber surface.Thinning the first coat is not normally recommended, but if carried out care must be taken to allow...

Open the catalog to page 2

Weatherfast Marine Varnish 2Pages

Catalog excerpts

All Norglass catalogs and brochures

Weatherfast Marine Varnish
2Pages