Catalogs >
Norglass >
Microshield Premium Varnish

Microshield Premium Varnish
2Pages

Catalog excerpts

MICROSHIELD PREMIUM VARNISH SEPT 2015 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: norglass@bigpond.net.au www.norglass.com.au MICROSHIELD PREMIUM VARNISH DESCRIPTION: A clear, low odour, high gloss urethane/alkyd blend with high levels of state of the art inhibitors and stabilizers for maximum exterior protection. USES: Panelling, doors, outdoor furniture, railings, general bright work on boats and all areas not subjected to heavy traffic. Light Amber High Gloss DRYING TIME: After 16 hours at 50% relative humidity MIXING RATIO: Not normally recommended, but up to 5% WEATHERFAST BRUSHING THINNER can be added to improve flow in hot weather. VOLUME SOLIDS: FLASH POINT: WEATHERFAST BRUSHING THINNER

Open the catalog to page 1

MICRIOSHIELD PREMIUM VARNISH New Bare Timber must be dry, well sanded and have the dust particles within the grain removed by clean rags soaked in NORCLEAN—PLUS. Previously varnished timber (in good condition) should be sanded thoroughly to a flat state then wiped over with a lint free cloth in NOR-CLEAN PLUS. Cracked or peeling varnishes must be totally removed back to a clean dry timber state. The first coat should be applied by brush to work the product in to the timber surface. Thinning the first coat is not normally recommended, but if carried out care must be taken to allow additional...

Open the catalog to page 2

Microshield Premium Varnish 2Pages

Catalog excerpts

All Norglass catalogs and brochures

Microshield Premium Varnish
2Pages