Catalogs >
Norglass >
Glue Promoter

Glue Promoter
2Pages

Catalog excerpts

PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: norglass@bigpond.net.au www.norglass.com.au GLUE PROMOTER DESCRIPTION: A blended lightweight extender for Norglass epoxies. To provide a thixotropic glue Dry white fluffy Powder Non Hazardous according to the criteria of Worksafe Australia Varies according to Epoxy Resin mix. Glue consistency. DRYING TIME: Subject to resin volume. MIXING RATIO: 3:1 by vol. Add 60g to 750mls of Norsystem resin base then add 250 mls of fast or slow hardener. VOLUME SOLIDS: FLASH POINT: NORGLASS EPOXY THINNER

Open the catalog to page 1

GLUE PROMOTER Pour 750mls of Norsystem resin base into a plastic pail. Then add in 60g Glue Promoter using a drill and paint stirrer blade, Blend thoroughly and then add in 250mls of Norsystem Hardener. Apply by trowel or flat bladed knife. Wear gloves, goggles and mask when incorporating. If in eyes, rinse with plenty of water for 15 minutes, with eyelids held open. If irritation persists seek medical attention. If on skin wash with soap and water. If inhaled, remove to fresh air. If difficulty breathing give oxygen and seek medical attention or call the Poisons Information Centre on 131...

Open the catalog to page 2

Glue Promoter 2Pages

Catalog excerpts

All Norglass catalogs and brochures

Glue Promoter
2Pages