The ultimate in creativity and flexibility! If you have a custom application and wonder if we make a panel to fit , here is your answer! The Nordskog Create-a-Dash Digital Instrument Kit will fit nearly every application by providing all six (6) gauges on individual boards. This allows you to place the gauge displays exactly where you want them on an included backing marine board so they will appear in the correct spot in your dash. After you decide on placement, all you have to do is mount the smoked lens over the boards , install the assembly behind your dash. The Speedometer and Tachometer boards are 3.5" x 3.5" and the Oil PSI, Voltmeter, Water Temperature and Fuel Level boards are 2.0" x 2.0." The panels "black out" when turned off for a smooth, clean look. Speedometer accurate to 200 MPH and featuring odometer, trip meter, one-button calibration (regardless of tire size, gear ratio or transmission) and 0-60 time, V4 mile ET and high speed recall, all with the push of a button • Tachometer (0-9,900 RPM in 100 RPM increments) • Water Temperature display with 100-300 °F range (Sender S8013 included) • Oil Pressure display with 10-100 PSI range (sending unit S8014 included) • Voltmeter display with 8-18 volt range (no sending unit required) • Fuel Level display with 0-100% range in 1% increments (works with most factory senders) • Universal Speed Sensor S9013 included, and works with most electronic speed sensors • High beam, turn signal and emergency brake indicator LEDs • Available in Blue, Red, Green and Amber LED displays |