video corpo

ClubSwan50
19Pages

{{requestButtons}}

Catalog excerpts

ClubSwan50 - 3

Counterclockwise from top left: the Swan 39 Race version from 1978 designed by Ron Holland, the Swan 45 from 2002 and the ClubSwan 42 from 2006 both disgned by Germán Frers Nautor’s Swan has always offered high performance racing yachts to complement its classic range of cruising Swans, yachts such as the 39 and the 441 in Racing version. Today the yard uses its new ClubSwan models to test the most modern trends in design, materials and solutions, refining technologies that will then be used to the benefit of the cruising models. Like the Swan 45 and ClubSwan 42, successful one designs...

Open the catalog to page 3
ClubSwan50 - 5

Juan Kouyoumdjian Performance comes from two main areas: the first one is optimising the relationship between key parameters such as length, displacement, sail area and righting moment; the second is a specific refinement of these parameters within themselves. Designing the ClubSwan 50, the hull shape and appendages were refined using our CFD (Computational Fluid Dynamics) setup based on Star CCM+. At the beginning we use 0 DOF (degrees of freedom) calculations since we didn’t know the weight nor ideal trim of the boat and we analyzed different candidate topologies across a wide matrix of...

Open the catalog to page 5
ClubSwan50 - 6

The new ClubSwan 50 is at the cutting edge of contemporary yacht design. The brief was clear and simple: an extremely fast boat that would also be easy to take to the limit, convertible into a sports cruiser with limited crew, with captivating looks and the natural elegance of a Swan. It had to be both competitive in class racing and conceived as a One Design. In one word, this yacht had to be cool. The hull is modern and performing with full sections forward and a beamy transom, reverse bow, reverse sheer, pronounced chines, concave aft sections and reduced freeboards. Appendages are in...

Open the catalog to page 6
ClubSwan50 - 7

Sail plan The sail plan is latest generation: the mast has been positioned slightly aft of centre with a longer J ideal for powerful asymmetricals that can be either full or fractionally rigged. The square top mainsail has a full shape thanks to running backstays: a perfect combination for the racing circuit. But the sail plan has also been designed with easy sailing in mind. A few changes transform the ClubSwan 50 into a docile cruiser, perfect for a couple. In moderate winds the running backstays can be positioned at the mast, whilst in stronger breezes the double reefed mainsail passes...

Open the catalog to page 7
ClubSwan50 - 8

Efficiency with a large crew and ease of use for a couple: the deck layout has been planned to be ideal in both cases, another revolution offered by the ClubSwan 50. The transverse jib tracks on the coachroof allow pure performance upwind angles and the six powerful racing winches make sail handling during racing fluid and efficient. In an instant the same layout can be adapted for solitary handling: the four winches around the helm can be used to control every function on board and, with the furling headsail configuration, it is easy to achieve top performance with a reduced crew, gybing...

Open the catalog to page 8
ClubSwan50 - 9

SIX RACING WINCHES AS STANDARD VERY LARGE COCKPIT (TEAK OPT) STORAGE IN THE DEEP STORAGE SPRAYHOOD (OPT.) LAZARETTE UNDERNEATH BENCH FULL NATURAL TEAK DECK AS STANDARD

Open the catalog to page 9
ClubSwan50 - 10

Designed as a week-end sailer, the ClubSwan50 offers refined interiors that are perfect for comfortable short cruises or longer sports cruising. The elegant and stylish interiors designed by the Italian Architect Michele Bönan and realized by Poltrona Frau feature high quality textiles and leathers, designed for optimal performance and durability. These are combined with hand crafted teak, for which Nautor is famed, set against the exposed carbon fibre lightweight structures. The saloon offers spaces typical of larger yachts, with eye-catching twin sofas and an open view forward. The double...

Open the catalog to page 10
ClubSwan50 - 12

HULL & STRUCTURE IN CARBON / EPOXY SPRINT LAMINATE EASY SWITCH FROM RACING TO CRUISING CONVERTIBLE FORE CABIN CRUISING/RACING OPTIONAL THREE CABIN LAYOUT GALLEY WITH TOP LOADING FRIDGE

Open the catalog to page 12
ClubSwan50 - 13

Under sail Stepping onboard, the first impression upon sailing is that this is something extremely special. Leaving the dock under engine, in economic cruise mode she makes easily 9 knots, thanks to her light displacement. In light winds, the square top mainsail coupled with the generous foretriangle are able to produce plenty of power. The hull shape is designed to reach optimum performance at 22 degrees of heel angle sailing upwind and the Clubswan 50 quickly settles into the groove, boat speed building impressively. In light wind conditions, the stern has only minimal sections touching...

Open the catalog to page 13
ClubSwan50 - 15

Hull structure including keel box reinforcements is a carbon epoxy sprint moulded part cured together with the hull to create a uniform structural unit. •  Structural bulkheads in composite carbon epoxy sandwich sprint, bonded to the hull with structural epoxy adhesive. • Two rudders with carbon/epoxy composite stock and shells, foam filled. •  Carbon/ epoxy sprint laminate, vacuum bagged and cured in the oven at elevated temperature. Sandwich construction with a high performance foam Corecell core • Structural bulkheads are bonded to the deck with structural epoxy adhesive  •  Teak on the...

Open the catalog to page 15
ClubSwan50 - 16

The quality that has made Swans so famous during the years can be seen in the obsessive attention to detail that can be found throughout the yacht. Technologies have evolved but the spirit with which a Swan is desgned and built remains the same: seaworthiness, reliability and style are and always have been our main drivers. That is why on our yachts we use only the best materials and the technologies that have proved their worth and durability in prolonged and severe conditions. Standard specifications General Hiil LOA (md. Do’.vspril and txxxr) 16.74 m Htil construction length 15.24 m...

Open the catalog to page 16
ClubSwan50 - 17

The ClubSwan 50, was conceived to officially celebrate Nautor's 50th Anniversary and represents an innovative concept strictly oriented on One-design racing. This means being defined by clear rules, being synonymous with pure sport in yachting competitions. Yachts are the same and it is all about strategy, tactics, crew work, and sailing technique. Class Rules And Measurement Certificates The boat will be measured and certified directly at the yard, with a measurement process that has been conceived alongside the boat building process. All supplied components will be endorsed with a...

Open the catalog to page 17

All Nautor Swan catalogs and brochures

  1. CLUB 43

    15 Pages

  2. OVERSHADOW

    17 Pages

  3. ClubSwan 80

    24 Pages

  4. SWAN 55

    17 Pages

  5. CLUB 36

    40 Pages

  6. Clubswan 50

    21 Pages

  7. CLUBSWAN 50

    21 Pages

  8. Swan 48

    19 Pages

  9. Swan 58

    17 Pages

  10. SWAN 65

    19 Pages

  11. SWAN 98

    18 Pages

  12. SWAN 78

    19 Pages

  13. SWAN 54

    4 Pages

  14. SWAN 115 S

    23 Pages

  15. Swan65

    15 Pages

  16. Swan 60FD

    6 Pages

  17. Swan 60S

    30 Pages

  18. 115 FD

    6 Pages

  19. Swan 54

    9 Pages

  20. 105 RS

    6 Pages

  21. 105 S

    6 Pages

  22. 105 FD

    4 Pages

  23. SWAN 95 FD

    6 Pages

  24. SWAN 95 S

    6 Pages

  25. Swan-60

    12 Pages

  26. Swan 90

    24 Pages

  27. Swan 80

    24 Pages

  28. Swan 66

    24 Pages

  29. ClubSwan 42

    12 Pages

Archived catalogs

  1. Swan78

    15 Pages

  2. Swan 54

    17 Pages

  3. Swan-105

    14 Pages

  4. Swan 105

    12 Pages

  5. Swan 53

    12 Pages