ANTIFOULING FOR ALUMINIUM BOATS MANUFACTURER

A1

MIXED MATRIX ANTIFOULING FOR WELL PROTECTED ALUMINIUM BOATS ALU Antifouling, mixed matrix for perfectly protected aluminium hull12 m
2 /Ltr per coat2 coats of A1are recommendedAt 15 ° C : wait 3 hours between coats3 hours before launching Contain a derivated copperThinner DA 0,75 L 2,5 L 20 L colours A1 white / blue France / black

NAUTIX A1 contains an optimum level of derivated copperthiocyanate for the best efficiency : low corrosion risk exceptin case of bad aluminium protection. A1 must be applied overthe appropriated aluminium pretective marine primer. Control regular-ly the protection. Recommended primers : Nautix Acralu (1coat) + Nautix PA (5 coats) or Nautix Acralu (1 coat) + Nautix epoxy (5 coats).

A2

MIXED MATRIX ANTIFOULING FOR ALUMINIUMBOATS : 100% COPPER FREE ALU Mixed matrix metal-free8,5 m
2 /Ltr per coat2 coats are recommendedAt 15 ° C : wait 3 hours between coats3 hours before launching 7 to 8 month efficiencyThinner DA 0,75 L 2,5 L 20 L colours A2 white / blue France / black

NAUTIX A2 self-polishing antifouling for aluminium hulls does not contain any copper based ingredient. This product is effi-cient against grass and sea-weeds. Its efficiency against bio-fouling (barnacles...) is not as high as that of the A1. When a sufficient thickness isapplied, the A2 allows you to clean the hull without causingdamage to the primer protecting the aluminium.

PAGE 14