RACING BOTTOM BOAT PAINTS A9

T.SPEED™ FLUO

HIGH QUALITY HARD MATRIXFLUO ANTIFOULING FOR LEADING EDGES OF KEELS AND RUDDERS 20 nds ALU Hard matrixApply directly on the antifouling of the hull12m
2 /L (can) Application : brush or roller At 15 ° C, wait 3 hours between 2 coats and before launchingA9 T.Speed must overcoat A4 T.Speed white antifouling Thinner : DA 0,35 L 0,75 L 2,5 L colours A9 T.
SPEED

™

fluo orange fluo

White

T.SPEED™

NEW BOTTOM NON ANTIFOULING COATINGRECOMMENDED FOR DRY SAILING AND RACING BOATS SUPPLIERS Mixing ratio by volume : 3 part base – 1 part hardenerMixing ratio by weight : 4 part base – 1 part hardenerApplication Preferably by spray boat gun, nozzle1.5-1.7mm, 2 bars pressureThinner : DP 12 m
2 /L per coatAt 15
C, wait 5 hours between 2 coatsFinish : Wet sanding paper grade 1000 0,75 L 2, L colours White
T .
SPEED

™

white / black

NAUTIX WHITE T.SPEED- a 100% biocide free coating. WhiteTspeed is not an antifouling but a sliding paint recommendedto be applied over dry sailing skiff hulls or for boats staying nomore than 15 days in water. This paint is resulting from latestR&D Nautix development and contains a high percentage ofsliding agents called T.speed“. T.SPEED“ means a super smooth friction free surface to reduced turbulences and toincrease speed (or to save fuel). T.Speed“ is contained in theglobal paint matrix. With a regular light sanding (paper grade800-1000), T.Speed effect can be reactivated. Currently, thispaint is applied over many Mum 30 (winner of the Tour de France 2006), floaters of many 60' ORMA trimaran, TP 52…

PAGE 13