4 OPTIPARTS

COVERS

FULLBATTEN TOPCOVER This cover has 2 sailbattens integrated in the top panel. The top panel will be tented when the webbing straps connected to both ends of each batten are tensioned. Made of Grey 600D pvc coated ripstop polyester. The padded panels on the front back and sides fold around the corners and protect your hull. (not available in the Netherlands) EX1080Padded full batten topcover Colour: Light grey .
NEW! Breathable top cover made of Moistureguard 2000, a heavy duty 900Dpolyester with a polyurethane membrane which has excellent breathability and is fairly water-resistant. The cover can be tented by storing the spars under the cover inside the boat. Wide skirts around the edge of the hull for good protection. Fast and easy to install with two straps with two adjustable quick-clip buckles. EX1081Breathable Moistureguard topcover Colour: Light grey. Low cost topcover. Design like EX1081 but made of 600D pvc coated polyester. 100% water resistant but not breathable. Color: Blue

EX1081EX1082 (NOT SHOWN) EX1091

EX1082Optiparts topcover “economy”, not shown. Breathable undercover made of Moistureguard 2000Quick and easy to install with a 6 mm shockcord in the skirt and 2 straps with quick-clip buckles. With 3 wide strips of thick foam in the bottom to protect the hull (even from concrete) while being rigged. Color: Light grey EX1091Optiparts undercover of "Moistureguard 2000" . Fully padded undercover. Provides the best possible protection during transport 420 PU outside, 190Tinterlining inside and closed cell foam in between.

EX1095

EX1095Optiparts fully padded undercover.

TROLLEY/ DOLLY

Aluminum trolley with small or large pneumatic wheels.Now with stainless steel heel protector and BOW WOW! Anew unique system to lock the bow to the trolley with one quick and simple movement. The hull will not slide off the slippery wet trolley anymore. The BOW WOW prevents damage to the stern. Also available as a replacement kit to fit older Optiparts trolleys.Quick release push buttons: This system allows the trolley to be disassem-bled in three pieces in a few seconds. Large wheels are preferred where Optimists are being launched from beaches or muddy slipways. Made of square Aluminum tube with rounded corners. All joints are welded and all surfaces on which the boat rests are padded with red pvc tubing. Support: The axle of the trolley is extended so the hull fits upside down between the wheels. Anodized: The whole frame is anodized to prevent corrosion.

EX1076EX1078EX1079EX10791

EX1075 Optiparts trolley / Dolly small wheels, not shown.

EX10792

EX1076 Optiparts trolley / Dolly large wheels, shown. EX1077BOW WOW replacement kit. EX1078Spare pneumatic wheel, 26 cm. EX1079Spare pneumatic wheel, 40.5 cm. EX10790Stainless steel spring clip for securing large wheels only!

EX10790

EX10791Galvanized spring clip for securing wheels. EX10792New, round button, spring locking system.

BOW WOW

EX1077

OPTIPARTS , tel: +31-30-2414068, fax +31-30-2387375, e-mail: mail@optiparts.com,