| • Groco Fitting (Sea Strainer, Thru-Hull, Seacock) • Thru Hull Exists Through Underwater or under Swim Platform • Fire Extinguisher - Engine Room, Fire Boy w/Engine & Blower Shut Off • Smoke Detectors • Carbon Monoxide Detectors • Multi Bilge High Water Alarm • Pneumatic Big Boat Air Horn • Reverse Cycle Heat/AC, 48,000 BTU Std. • Windshield Defogger Plumb Air/Heat for Defogger DECK & HULL Construction: • Hull Bottom & Sides to Waterline in Solid FRP - First 4 Layers in Vinylester Resin • Superstructure / Topsides - First 1 Layer in Vinylester Resin • Superstructure / Topsides 1/2" to 1" PVC Foam • Nida Core Composite Conducted by Vacuum Bag • Chain Locker Bulkhead w/1" Nida Core Reinforced with FRP • Frwd. Eng. Rm. Bulkhead Watertight w/2" Nida Core Reinforced with FRP • Aft Eng. Rm. Bulkhead Watertight w/2" Nida Core Reinforced with FRP • Main Deck Salon 2" and P/H 1" Nida Core Reinforced with FRP • Lower Deck 1" Nida Core Reinforced with FRP • Vinylester and PVC Foam /Ortho Polyester • Engine Room Insulation - 1" Foam with Lead Inlay - Covered w/White Aluminum Perforated Panel • Fiberglass Main Engine Stringers with Internal Steel Reinforcement • Prop Pocket Shaft Tunnels for Reduced Draft and Reduced Shaft Angle • Salon / Aft Deck Sliding Marine door, Stainless Steel with Curved Glass • Pilot House - Pantograph Side Entry Door Using Stainless Steel Hinges • Laz./Eng. Rm. Access Through Cockpit/Salon Stairs • Flush Frameless Windows - Front Clear Safety Glass 5MM + 5MM • Flush Frameless Windows - Side Tinted Safety Glass 5MM + 5MM • High Bulwarks with Thru-Bolted Oval Stainless Steel Rails (No Screws) DECK ARRANGEMENT • Sunbathing Cushion on Foredeck • Stairs from Upper Cockpit to Flybridge • Heavy Duty Stainless Steel Deck Cleats and Hawse Holes • Heavy Duty Stainless Steel Port Lights • Stainless Steel Flybridge Venturi Frame with Glass Windshield • White Taco Rub Rail with Stainless Steel Inlay and Upper Hullside • Fiberglass Rub Rail with Stainless Steel on Lower Hull Side at the Stern |