M.A.T. 1245 - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

M.A.T. 12 Redesigned 400 kg lighter keel fin 110 mm deeper keel with less surface Adjustable draft Redesigned bulb for less wetted area Adjustable bulb weight New rudder for lighter helm and less friction New windows Updated interior Type 12.45 m production dual purpose yacht aimed at providing competitive IRC performance and comfortable accommodation Design Mills Yacht Design, Mark Mills www.mills-design.com Please refer to VPP tables for configuration selection suitable to your racing area. Design Category CE category A 10 Dimensions Length overall Hull length LWL Beam max Draft Displacement Ballast Rudder and Steering "There is more than a 10% reduction in area, and due to a change in the foil section which helps keep the overall chord thickness from growing, there should be no loss of grip, and a better warning effect as the helm approaches the stall." Construction Hull and deck produced with vacuum assisted resin infusion technology (VAI) in PVC foam cored vinylester/e-glass Bulkheads produced with VAI in PVC cored vinylester/e-glass, laminated and structurally bonded to hull and deck Multiaxial structural e-glass reinforcement fabrics White colored isophtalic NPG acid gelcoat on hull, deck, bulkheads and interior molding Molded nonskid on deck and cockpit floor Composite structural IGU for interior arrangement Light composite interior components in PVC cored polyester/e-glass *Vacuum assisted resin infusion technology Resin will fill every little gap that is under vacuum The structure is free of voids 65/35 glass/resin content Keel 580 kg SG iron fin with 2640/2800 kg lead/antimony bulb, total 3240/3380 kg (approximate), adjustable draft and bulb weight. Recessed in the hull Coated and faired with a layer glass/epoxy Comparison to M.A.T. 12 keel: 110 mm deeper draft option 400 kg lighter fin 0.5 sqm less surface area for the fin 2.640 or 2.800 kg bulb weight 0.1 sqm less surface area for the bulb Right to modification without prenotice reserved Mark Mills New M.A.T. 1245 rudder at left Comparison to M.A.T. 12 rudder at right (New rudder shown with thin lines) Composite rudder and custom carbon fiber stock Jefa high performance self-aligning top/lower rudder bearings Provision for emergency tiller on rudder stock Composite twin pedestals Carbonautica twin 1000 mm composite wheels black (or custom colored) Twin composite removable footrests for helmsman on request Deck Primary winches: 2 x Harken Radial B50.2 STA self-tailing 2 speed alloy winches Halyard winches: 2 x Harken Radial B46.2 STA self-tailing 2 speed alloy winches Mainsheet winches: 2 x Harken Radial B46.2 STA self-tailing 2 speed alloy winches 4 x Harken 10" lock-in winch handles

 Open the catalogue to page 1

Harken Performa racing winches on request Harken Black Magic racing block and car package including: 2:1 mainsheet to winch Mainsheet traveller and track, blocks for 6:1 windward sheeting traveler purchase system Longitudinal jib tracks, ball bearing cars and blocks for 12:1 purchase system Spinnaker sheet and deflector blocks 2:1 Spinnaker sheet tweaker blocks 2:1 Foreguy blocks Halyard lead blocks Halyard crossover blocks 4 Spinlock XX and 2 XTS series clutches Custom alloy fairleads Wichard folding pad eyes Recessed new cabin windows. Tempered laminated scratch and impact resistant safety glass....

 Open the catalogue to page 2

All M.A.T. Sailing Yachts catalogues and brochures

  1. M.A.T. 1180

    1 Pages

    En
  2. M.A.T. 1010

    1 Pages

    En

Archived catalogues

  1. M.A.T. 6.5

    2 Pages

    En
  2. M.A.T. 12

    2 Pages

    En