Text version of the page

Data Sheet # 08

Emulsion Breaking Bilge Water Cleaning System - 31321 USCG MED IMO MEPC 107 (49) Approved Emulsion Breaking Bilge Water Cleaning System EBBWCS Mk III - Model “CD”

Influent Bilge Water including free Oil and Emulsions Effluent Watercontaining EBBWCS CD-1.0 The sludge/refuse chamber of an EBBWCS CD-1.0 The Marinfloc EBBWCS Mk III model “CD ”, with capacities from 0,25 m3/hour up to 5,0 m3/hour, is a fully automatic constant flow Emulsion Breaking Bilge Water Cleaning System.

Highlights

-To process your Bilge Water in a EBBWCS CD will only cost you USD 3,0.-/m³ cleaned water.

-As its precursors, the effluent processed water from the CD contains -The Mk III “CD” needs less pre-heating of the process water .-The Mk III “CD” has a higher tolerance to fluctuations in the PH value .-The material in the Mk III “CD” is AISI 316L stainless steel. -The Mk III “CD” has very small foot prints in relation to its capacity .-The separating and emulsion breaking technology used in the Mk III “CD” keeps the water content in the drain/refuse between 2 and 5% of the Processed Bilge Water Volume. I.e. at a minimum.
Version4.0/15 01 2008/BC/MG/HLP