Catalogue Marina & Dock Equipment brochure
www.dockequipment.com
print switch display
Page / 43
Contact the
Manufacturer
Where to buy
this product ?
Marina & Dock Equipment - 19725, 18056
/ 43
See all the products Marina & Dock Equipment
Text version of the page
Marina & Boat dock Equipment / Alltel Industries
www.marina-dock.com ? Tel. 877-255-3625

PowerPort Specifications

(cont'd)C. Cable Television / Telephone

1. Pedestals shall be capable of providing single and dual cable television and telephone service through standard marine receptacles. 2. Single and dual services must be separate and be weather protected and lockable with the same requirements as B.5. 3. Television and telephone receptacles must be at least 24” above the mounting plane. 4. Low voltage wiring for television / telephone service must be continuously separated from power wiring by a non-metallic barrier.

D. Lighting

1. Pedestals shall have diffused downward directed lighting using either fluorescent or incandescent lamps. Maximum wattage for fluorescent lamps is 15w and for incandescent lamps is 60w. Each marine pedestal light circuit must be protected by a suitable fuse located internally to minimize vandalism. 2. Lighting shall be controlled for a group of pedestals from a single externally controlled source. 3. Optionally each pedestal light shall be controlled from an internal photocell protected from the weather. 4. Lighting circuit components must be accessible for maintenance with a tool to open mechanism that is both quick and easy.

E. Wiring

1. Pedestals shall be factory pre-wired of stranded copper wire and shall provide physical isolation between high and low voltage/water systems. 2. Access to line feed and termination areas shall be open and unobstructed. It must be convenient to hold incoming feed lines with both hands to position the ends into the lugs or posts. 3. The factory pre-wire must be adequate to supply the maximum future load according to the specific pedestal specification.

F. Plumbing

1. Pedestals shall be capable of providing up to two (2) ¾” hose bibs with stainless steel ¼ turn ball valves. 2. Elevation of hose bibs shall be between 12 and 15” to allow placement of a bucket beneath the bib. 3. Cable/Hose Brackets (2) capable of holding 50’ of 50A 125/250V SO cable or 5/8” water hose must be provided.
© Copyright 2003-2004 Marina & Dock Equipment
NauticExpo's Virtual Library: PDF Catalogues | Documentation | Boating Brochures | Manuals | Marine directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14
page 15 p.15
page 16 p.16
page 17 p.17
page 18 p.18
page 19 p.19
page 20 p.20
page 21 p.21
page 22 p.22
page 23 p.23
page 24 p.24
page 25 p.25
page 26 p.26
page 27 p.27
page 28 p.28
page 29 p.29
page 30 p.30
page 31 p.31
page 32 p.32
page 33 p.33
page 34 p.34
page 35 p.35
page 36 p.36
page 37 p.37
page 38 p.38
page 39 p.39
page 40 p.40
page 41 p.41
page 42 p.42
page 43 p.43
pdf-page pdf ne En 2009-01-02-08