RAA100

Maretron's RAA100 is used to adapt commercially available resistive rudder senders to the NMEA 2000®network. This allows you to observe rudder angle any-where on the vessel where there is an NMEA 2000®compatible display such as the Maretron DSM200. The RAA100 is compatible with both the Americanstandard (240-30 ohms) and European standard (10- 180 ohm) resistive senders. In fact, the RAA100 can be calibrated for any resistance between 0 and 300 ohms. You can also use the RAA100 with analog gauges atthe same time as NMEA 2000®so you don't have togive up existing analog gauges to enjoy the advan- tages of digitally networked information. The Maretron RAA100 has the following features: ·NMEA 2000®Interface·Adapts American standard (240-30 ohm) resistive senders to NMEA 2000®Network ·Adapts European standard (10-180 ohm) resistive senders to NMEA 2000®Network·Can be Calibrated for any Resistive Sender Ranging from 0-300 Ohms or 300-0 Ohms·Three Point Electronic Calibration eliminatesneed for Mechanical Adjustment or Calibration·Can be Used Standalone Without Analog Gauges