Catalogs >
Maretron >
FPM100 fluid pressure monitor

FPM100 fluid pressure monitor
2Pages

Catalog excerpts

Fluid Pressure Monitor Maretron’s Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible displays. With the appropriate transducer, the FPM100 reports either pressure or vacuum for a variety of applications including water pressures, oil pressures, hydraulic pressures, or system vacuum for detecting clogged filters. The FPM100 also has a tank level mode, so that fluid levels in a tank can be monitored via a pressure transducer mounted at the bottom of the tank and transmitted over the NMEA 2000® network. This allows you to monitor the fluid levels in tanks that are extremely deep, have internal structures, or are otherwise not suited for other tank level sensing technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so that you know the true level of the tanks. The following accessories are available for the FPM100: The Maretron FPM100 has the following features: • NMEA 2000® interface • Adapts up to six pressure transducers to the NMEA 2000® network • Each channel independently programmed to match pressure transducer characteristics • Each channel independently programmed in pressure/ vacuum mode or tank level mode PART NUMBER DESCRIPTION Fluid Pressure Monitor Pressure Transducer 0 to 3 PSI Pressure Transducer 0 to 5 PSI Pressure Transducer 0 to 10 PSI Pressure Transducer 0 to 50 PSI Pressure Transducer 0 to 100 PSI Pressure Transducer 0 to 300 PSI Pressure Transducer 0 to 500 PSI Pressure Transducer 0 to 1000 PSI Pressure Transducer 0 to 3000 PSI Pressure Transducer 0 to 5000 PSI Pressure Snubber Pressure Transducer Vacuum to 1 Bar

Open the catalog to page 1

Specifications Specifications (Pressure/ (Tank Level Mode) Vaccuum Mode) NMEA 2000® Parameter Group Numbers (PGNs) See Appendix A for Details Exclusive of Pressure Transducer Number of Pressure Source Types Over Full Pressure Transducer Range Water Pressure, Atmospheric Pressure, Compressed Air Pressure, Hydraulic Pressure, Steam Pressure, 16 User Defined Sources Over Full Pressure Transducer Range Number of Tank Types Fuel, Fresh Water, Waste water, Live well, Oil, etc. Number of Tanks per Tank Type 16 Tanks per Tank Type Numbered 0-15 Support for Irregularly Shaped Tanks Can be Calibrated...

Open the catalog to page 2