Catalogs >
Maretron >
DCM100 - NMEA 2000® Direct Current Monitor

DCM100 - NMEA 2000® Direct Current Monitor
2Pages

Catalog excerpts

DCM100 - NMEA 2000® Direct Current Monitor - 1

Direct Current Monitor Maretron’s DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit. When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don’t have to break connections or install connectors as you do with inline shunts used by other solutions. Best of all, the DCM100 is NMEA 2000® certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000® display. The DCM100 is a key component of Maretron’s N2KView® vessel monitoring and control system. The following accessory is available for the DCM100: LEMHTAx00-S • Battery Voltage • Battery Current • Ripple Voltage • Battery Case Temperature • State of Charge • Time Remaining • Charge Efficiency Factor PART NUMBER DCM100-01 Direct Current (DC) Monitor FC01 Harness with Fuse DCM100 Battery LEMHTA200-S Amp Current Transducer with Cable 200 LEMHTA400-S Amp Current Transducer with Cable 400 LEMHTA600-S Amp Current Transducer with Cable 600 TR3K DCM100 Ring/Under Bolt Temperature Probe

Open the catalog to page 1

DCM100 - NMEA 2000® Direct Current Monitor - 2

Certifications Specifications Battery Sense Voltage Range Battery Sense Voltage Accuracy Battery Current Range With included Hall-effect current sensor With included Hall-effect current sensor Battery Current Accuracy Maritime Navigation and Radio Communication Equipment & Systems Maritime Navigation and Radio Communication Equipment & Systems Electromagnetic Compatibility Default Rate NMEA 2000® Parameter Group Numbers Power Consumption NMEA Interface Battery Interface Operating Voltage VPWR+, VPWR- NMEA 2000 Interface Load Equivalence Number (LEN) Reverse Battery Protection Load Dump...

Open the catalog to page 2