Text version of the page 
MAGNUM VENUS PLASTECH
Winders, Reciprocators and Impregnators -- M.V.P. provides solutions to your Advanced FRP challenges
When it comes to providing the Total Solution -- M.V.P. delivers. Award-winning technology combined with over 50 years of industry expertise has given M.V.P. a strong reputation for quality products. M.V.P. has continually used innovative designs to help the industry meet governmental demands to reduce emissions, while at the same time providing significant material savings.The Advanced FRP series of equipment is no exception. The modularity of our Winders, Reciprocators and Fiber Wet-Out Systems allows our systems to grow with your operation. From manual operations to full automation, Magnum Venus Plastech has the solution to your Advanced FRP challenges.
Mandrel Diameters: 2 in. to 14 ft. (5.1 cm - 4.3 m)Mandrel Length: Up to 40 ft. (12.2 m)
Winder Dimensions:
Length: 29 ft. (8.8 m)
Width: 8 ft. (2.4 m)
Height: 17 ft. (5.2 m) Typical Dimensions Average Winder Specifications Resin: approx. 30 lbs./min. (13.6 kg)Chopped Glass: approx. 11 lbs./min (4.9 kg)
Hoop Wind Glass: approx. 18 lbs./min. (8.2 kg)
Catalyst Ratio: 0.4% - 2.2%
Air Consumption: 70 CFM
Electrical: 110 volt, 6 amp, 1 phase, 60 cycle Average Reciprocator Specifications Gelcoat: approx. 5400 ft. Output Output
2 /hour (500 m
2 /hour)Laminate: approx. 2700 ft.
2 /hour (250 m
2 /hour), 1/16 in. (1.6 mm), 30% glassAir Consumption: 80 CFM (2.3 m
3 )/min.; 100 psi (7kg/cm
2 )Electrical: 220 volt, single phase, 30 amps, 60 cycle Typical Physical Equipment Dimensions Length: 10 ft. (3.1 m)Width: 19 ft. (5.8 m)
Height: 11 ft. (3.4 m) Standard Width: 8 ft. (2.44 m)
Optional Width: Up to 16 ft. (4.88 m) Typical Shipping Dimensions Average Fiber Wet-Out System Specifications Output approx. 1000 lbs. (454 kg)/hour; 20 ft. (6.1 m)/min. 18 in. to 60 in. (45.7 cm to 1.5 m) Fiberglass Fabric Widths
E-mail: info@mvpind.com · Web: www.mvpind.com Please contact M.V.P. for a feasibility study of how the Advanced FRP series of equipment can improve you process and bottom line.
M.V.P. Technology Center 1862 Ives Ave.
Kent, WA 98032 USA
tel: (253) 854-2660
fax: (253) 854-1666 For more information, contact: MAGNUM VENUS PLASTECH
Official M.V.P. Distributor Corp HQ/Mfg. M.V.P. - Plastech Facility U.K. 5148 113th Ave. N.
Clearwater, FL 33760 tel: (727) 573-2955
fax: (727) 571-3636 Chilsworthy Beam, Gunnislake
Cornwall, PL18 9AT · U.K.
Tel:+44(0) 1822 832 621
Fax: +44(0) 1822 833 999 © Copyright 2007 by Magnum Venus Plastech. All Rights Reserved. ML 1422 Rev. 03/07