Catalogue DG 14 & 16
professional.magellangps.com
print switch display
Page / 2
Contact the
Manufacturer
Where to buy
this product ?
Magellan Professional - 17882, 16020, 19429
/ 2
See other catalogues for Magellan Professional
Text version of the page
DG16 and DG14 Sensors
\
Compatibility
DG16 and DG14 from Thales are backward compatible with G12 in both hardware and software. They both have the same RF connector and the same 25-pin I/O connector location and pin-out as the G12. They also use the same standard Thales serial interface; allowing for easy and smooth upgrades. In addition, the DG16 and DG14 receivers consume less power than their predecessor, the G12™ marine receiver, and can be programmed for low power/sleep mode operation.
Evaluation Software
Evaluate™ software is available with the DG16 and provides visual displays of satellite information (e.g., SNR), receiver position and velocity as well as data logging and analysis. It also allows direct communication with the receiver. Compatible with all of our receivers, the software runs on Windows® version 3.x Windows 95/98, NT, 2000, and XP platforms.
DG16 Development Kit
The DG16 Development Kit includes a DG16 GPS receiver, GPS+Beacon boat antenna, power supply, cables, manuals and the Evaluate and Mission Planning™ Software. The kit is loaded with all the firmware options available.
DG14 Receiver
The DG14 from Thales is a 14-Channel receiver with 12 GPS L1 Code and carrier channels and 2 SBAS channels.While the DG14 is identical to the DG16 in performance, it does not have an on­boat board beacon receiver. All Other features are common to both DG16 and DG14 receiver.
TECHNICAL SPECIFICATIONS
Multipath Error Envelopes
1. Generic Standard Correlator Spacing, 1 chip
2. Generic Narrow Correlator Spacing, 0.1 chip
This figure shows the errors induced by a multipath signal half the strength of the direct signal.
Real-Time Position Accuracy1
Autonomous
CEP: 3.0 m (9.843 ft) 95%: 5.0 m (16.4 ft)
Differential2
Local Base Station
CEP: 40 cm (1.31 ft) 95%: 90 cm (2.95 ft)
Beacon
CEP: 70 cm (2.30 ft) 95%: 1.6 m (5.25 ft)
SBAS
CEP: 1.0 m (3.28 ft)
95%: 3.0 m (9.84 ft)
Velocity Accuracy1 (knots)
0.1 (95%)
Time To First Fix1
Re-acquisition 3 sec Hot start 11 sec
Warm start 35 sec
Cold start 90 sec
DG16/DG14 Features
• 14 Channels
12 GPS code and carrier
2 SBAS (WAAS/EGNOS/MSAS)
• Standard NMEA-0183 V3.0 output
• Selectable position and raw data rates up to 20 Hz
• Position latency output
• Raw data output (code and carrier)
• 1 PPS (5V TTL)
Precision: 200 ns (stand-alone) 50 ns (differential)
• Edge and Strobe Correlator
• Differential base and remote RTCM V2.3, message types 1,2,3,6,9,16,18,19
• 20 g tracking capability
• Kalman filter
• Event marker
• Session programming
• Integrated Differential Optimization™
• Low power sleep mode
• Wide array of coordinate transformation options
• 3 bi-directional RS-232 serial ports, up to 115,000 bps
• External LED drivers
• Multi-base Differential processing with WADGPS (optional)
• User Defined Messages (UDM)
• On-board 2 Channel Beacon Receiver (DG16 only)
• Receiver Autonomous Integrity Monitoring
(RAIM)
• Horizontal Protection Level (HPL) Output
• Speed (max)2: 514 m/sec (1,000 knots)
• Altitude (max)2: 18287 m (60,000 feet)
Environmental & Physical
• Operating Temp: -30°C to 60°C
(-22°F to 140°F)
• Storage Temp: -40°C to 85°C
(-40°F to 185°F)
• Power Consumption: 1.3 W (GPS only)
1.7 W (GPS + Beacon) 0.3 W (antenna)
• Input Voltage: 9-36 VDC Unregulated
• Size: 95 mm x 42 mm x 168 mm
(3.74 in x 1.65 in x 6.62 in)
• Connector: DB-25
• Weight: 540 gr (19 oz)
• Vibration:
- MILSPEC 810E / Category 10 "Minimum Integrity Test - General"
• Shock: ±40 g Operational
±75 g Non-Operational
• Acceleration: 20 g
• Humidity: 95% non-condensing
The horizontal axis of the plot show the multi-path delay, this is the extra distance that the reflected signal travels compared to the direct signal.The vertical axis shows the induced range error caused by a multipath signal with the indicated delay.
From this plot you can see that typical narrow correlator performance and Edge Correlator performance is similar, while Strobe Correlator performance is much better, almost totally cancelling any multipath with a delay of more than 37 m.
1 Accuracy and TTFF specifications based on tests conducted in Santa Clara and Moscow. Tests at different locations under different conditions may produce different results. Beacon tests based on 40 km baseline. Position accuracy may degrade with longer baselines.
Position accuracy specifications are for horizontal positioning. Vertical error is typically <2 times horizontal error.
2 Altitude and speed limitless versions available in HDMA board configuration under validated export license.
Thales
OEM Solutions Contact Information In France +33 2 28 09 38 00 • Fax +33 2 28 09 39 39 In Germany +49 81 6564 7930 • Fax +49 81 6564 7950 In Russia +7 095 956 5400 • Fax +7 095 956 5360 In UK +44 199 385 2436 • Fax +44 870 429 9236
In the Netherlands +31 78 61 57 988 • Fax +31 78 61 52 027
Email oemsalesemea@thalesnavigation.com Web site www.thalesgroup.com/navigation
HALES
Thales follows a policy of continuous product improvement; specifications and descriptions are thus subject to change without notice. Please contact Thales for the latest product information.
© 2005 Thales Navigation, Inc. All rights reserved. DG16, DG14, G12, Mission Planning, Edge, Z-Sensor, Strobe Correlator, Integrated Differential Optimization and Evaluate are trademarks of Thales Navigation, Inc. All other trademarks are property of their respective holders. Rev (22Aug05) Part # XC20095D
NauticExpo's Virtual Library: PDF Catalogues | Documentation | Boating Brochures | Manuals | Marine directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
pdf-page pdf ne En 2008-12-49-01