BOAT CLEATS Six 12” Herroshoff-style cleats located in the cockpit, midships and bow area for superior docking.CHOCKS Two Skene-style, 9” chromed bronze chocks at bow located to allow for anchor for boats well access. Four 316 stainless steel chafe plates to prevent abrasion to teak cap rail at bow. HAWSE PIPES Four hawse pipes located in the cockpit sized to accept a 50 amp cord. Two hawse pipes located midships to allow boat dock lines to slip in under the teak cap rail. EXTERIOR COURTESY BOAT LIGHTS Six waterproof courtesy lights located to light up deck for easy night time access. ANCHOR ROLLER Custom polished stainless steel stemhead fitting with marithane roller and stainless steel chafe plate on deck. Roller with anchor safety pin.BOW RAIL Custom stainless steel bow rail built to ABYC standards. HAND RAILS Six stainless steel handrails; two on the coach roof forward of the windshield, two on the topside of the cabin roof and two vertical rails at the aft end of the house for boat for foredeck access.CAP RAIL 4” X ¾” teak cap rail finished in high gloss, two-part polyurethane running the full length of the yacht.CABIN HOUSE STRIPE Vinyl accent stripe around the front of the coach house extending to the engine for boat air intake grill.DECK FILLS Two 2” fuel fills located port and starboard designed for high speed filling, one 1 ½” water fill located to port and one 1 ½” black water pump for boat out fitting located on the starboard side. All deck plates are engraved with fluid labels. SAILBOAT FLAG POLE AND SOCKET One 48” high teak staff finished in two-part high gloss polyurethane with fast pin for easy stowage. 48” American flag is standard.
5 Legacy by Freedom Yachts, 305 Oliphant Lane, Middletown, RI 02842 – Phone for boat (800)999-2909 Fax (401)848-2904