STANDARD SPECIFICATIONS LEGACY 32 EXPRESS

As of January 14, 2008 Subject to Change Without Notice

BUILDER

Freedom Yachts, Inc.

PRINCIPAL DIMENSIONS AND TANKAGE

LOA 32’6” BEAM MAX 12’4” DRAFT 3’10” DISPLACEMENT 14,500 lbs.FUEL CAPACITY 200 Gallons WATER CAPACITY 60 Gallons WASTE CAPACITY 35 Gallons

HULL CONSTRUCTION

HULL AND DECK STRUCTURE The hull carries a 5-year structural warranty. Internal structure carries a 5-year structural warranty. Gelcoat carries a 10-year warranty against osmotic blistering. The hull is constructed using Legacy’s Durahull technology. The deck, hull and all structural components are infused Vinylester construction. The centerline and leading edge of the keel are reinforced with Kevlar™ for impact resistance. All thru hull penetrations are designed to isolate the core materials from water penetration. Hull and deck are cored with Corecell™. Gelcoat is an ISO-NPG type. Underwater exhaust and thruster tubes are molded into the hull. Stringers are formed by a longitudinal and transverse molded framing grid constructed of FRP with reinforced engine for boats area fully bonded to the hull. Three infused and cored composite structural bulkheads are bonded to the hull to form four compartments; the forepeak, main cabin, engine room and lazarette. The structural components are fully bonded together to create a uni-body boat construction. All engineering is done in accordance with NMMA using ABYC rules for small offshore vessels. The bilges are finished in molded white gelcoat for easy maintenance. Limber holes are installed throughout the stringer system to allow for drainage of all compartments with the exception of the engine sump. This area is sealed to isolate the machinery fluids from the bilge system.

1