DECK HARDWARE

GENERAL All deck hardware is either 316 stainless steel or chromed bronze. All fitting bolts and screws are 316 stainless. Joints are bedded with a marine silicone adhesive sealant. MARINE WINDLASS 12v windlass with helm and bow controls. WINDSHIELD Tempered safety glass set in aluminum frames with center opening window. Sliding side windows to port and starboard. DECK SCUPPERS Four 2” aft drains and two 5/8” scupper hatch drains around hatches. All deck drains exit above the waterline and are self bailing with anti-return valves. MARINE CLEATS Six 10” Herroshoff-style cleats located in the midships, bow area and cockpit. ANCHOR FOR BOATS ROLLER Custom polished stainless steel stemhead fitting with marithane roller and stainless steel chafe plate on deck. BOW RAIL Custom, 1 ¼” stainless steel bow rail with burgee holder. CAP RAIL Teak cap rail finished in high gloss, two-part polyurethane surrounding the vessel with a vinyl rub rail and a 1 ½” stainless steel rub strake to protect the teak finish. The splash rail is teak with a stainless steel rub strake on the outer surface. ENGINE FOR BOAT AIR INTAKES Distinctive, wing-shaped stainless steel intake grills on either side of cabin side. Delta T intake baffled vents. CABIN HOUSE FOR BOATS STRIPE Vinyl accent stripe around the front of the coach house extending to the engine air intake grill. DECK FILLS Two 2” fuel fills located on the port/starboard sides designed for high speed filling. One 1 ½” water fill located to port and one 1 ½” black water pump for boat out fitting located on the starboard side. All deck plates are engraved with fluid labels. COCKPIT SOLE HATCHES Three FRP hatches access the steering and the stowage compartments. Each has stainless steel flush marine hinges, positive latching hatch pulls and the lazarettes have gas-assisted struts. Each hatch is guttered and drained overboard drains and rubber gasket sealed to inhibit water intrusion.

5