manual cutting machines
15Pages

MANUAL CUT TING MACHINES SMALL CUT TING MACHINES WITH POWER AND ENDUR ANCE FOR INDUSTRY AND HANDCR AFT

Innovative products in HIGH-TECH QUALITY It is difficult to imagine cutting and spreading without Kuris handheld cutting machines. The machine has to cater for the operator‘s method of working and not the other way round! INTRODUC TION SMALL CUTTING MACHINES Fit in the cutting industry starts with accurately cut material or technical textiles. Seldom has a handheld cutting tool been so keenly tailored to the cutter. Cutting thick layers, into tight corners, at acute angles - this is precisley what the machines are designed for. The quality of the cut - that is decided by the cutter and the...

NOVITA Standard NOVITA Standard APPLICATION AREA Effortlessly clean and without considerable technical investment you are therefore able to cut all manner of textiles and soft leather. There are applications for single layer and multiple layer cutting, particularly for cutting templates and patterns. Also ideal for trimming defective parts, for cutting knitwear and knitted goods straight and curtains, upholstery and decorative fabrics true to form, even for an unconventional application. Icelandic fishermen separate the tail fins of plaice and other fish, using the Novita Standard. The...

NOVITA Super NOVITA Super APPLICATION AREA The „Novita Super“provides concentrated force to withstand heavy and even the most difficult of loads. The cutting performance is 10x greater than that of the Novita Standard version. Particularly handy and lightweight machine for cutting all types of material in layers up to approx. 8 mm high, depending on the material. 33294 – Novita Super with flat base Particularly suitable for needled felt, Skai, branded films, soft leather and upholstery cover materials. The lubricator reduces friction between the blade and the counter blade, enabling...

NOVITA Plus NOVITA Plus APPLICATION AREA A particularly convenient and lightweight machine for cutting all kinds of textiles for layers and up to approx. 8 mm high, depending on the type of material. Especially suitable for wool and soft materials. Either the flat base or the cutting skid may be used. The lubricator decreases friction between the blade and counter blade, enabling laminated goods to be cut. 56715 – Novita Plus with flat base The Novita Plus is fully insulated and VDE tested. A special combination gear mechanism gives the machine a unique motor speed strength across the...

APPLICATION AREA The Novita Jet is a modified version of the compressed air operated Novita Standard. It provides ease of use and increased performance everywhere where no electrical connection is possible for saftey reasons, e.g. in wet areas. Untiring and reliable just like all Kuris‘ NOVITA cutting machines. The Novita Jet is driven by compressed air. Therefore every saftey risk is eliminated (overload and the electric motor burn out). The motor cannot overheat even at a constant output and capacity overload. The outlet air is evacuated to the rear through a double-walled tube - inner...

33066 - BOM 30 SL with extension (85cm long) The BOM 30 SK and BOM 30 SL versions are supplied with a special base that is fed into an aluminium profile track. The BOM 30 SL with the extension and automatic ON/OFF switch is particularly suitable for trimming endless fabric. APPLICATION AREA A particularly convenient and lightweight machine for cutting all kinds of textiles for layers up to approx. 25 mm high, depending on the type of material. Especially suitable for wool and soft materials. The lubricator reduces friction between the blade and the counter blade, enabling laminated goods to...

The BOM 101 SK and BOM 101 SL versions are supplied with a special base that is fed into an aluminium profile track. The BOM 101 SL with the extension and automatic ON/OFF switch is particularly suitable for trimming endless fabric. BOM 101 APPLICATION AREA A particularly convenient and lightweight machine for cutting all kinds of textiles for layers up to approx. 25 mm high, depending on the type of material. The fortified „Power“ versions particularly suitable for jeans, leather and rigid fabrics as well as industrial fabrics. The lubricator reduces friction between the blade and the...

BOM 101 AKKU 69409 – BOM 101 Akku 2 Ah 80700 – BOM 101 Akku 2 AH SL (guided in a profile track, extension) 74839 – BOM 101 Akku 3 Ah 69026 – Battery 2 Ah (spare) (charge time: 1,5 h, 664 g) 67225 – Battery 3 Ah (spare) (charge time: 1,75 h, 722 g) 69093 – Charging unit Each machine complete with 1 charging unit and 1 battery BOM 101 AKKU APPLICATION AREA A particularly convenient and lightweight machine for cutting all kinds of textiles for layers up to approx. 27 mm high, depending on the type of material. The lubricator reduces friction between the blade and the counter blade, enabling...

33425 - KRS 550 R (rotating blade) 33453 - KRS 550 V (four-arc blade) 80646 - KRS 550 R for guide rail (BOM 101 profile track) 75786 - KRS 550 V for guide rail (BOM 101 profile track) 18 APPLICATION AREA The KRS 550 model of the Kuris cutting machines can be supplied as a rotating blade or a four-arc machine with counter blade. It is pssible to convert a rotating blade machine to a four-arc blade machine or vice versa using an appropriate unit. KRS 550 with rotating blade 1. For cutting all kinds and designs of textile materials. 2. Particularly suitable for cutting knitwear and knitted...

KSM 200 Right (rotating blade) KSM 200 Left (rotating blade) KSM 200L Cross cutter (four-arc blade) KSM 200L Left (four-arc blade) KSM 200L Right (four-arc blade) APPLICATION AREA Edge and middle cutters for special applications, individual customer solutions or special machine construction. KSM 200 in left-hand and right-hand design The KSM 200 machines have a rotating blade made from tool steel, a grinding device with two sharpening edges and no base plate. We recommend the rotating blade in HSS quality for certain types of cut. KSM 200L Q The „Q" stands for cross cutter. This machine...