Sail drive fixed
2Pages

Sail–Drive fixed Engine The heart of the system is the electric motor. The drive must work powerful, reliable, quiet and maintenance-free. For Kräutler Sail-Drive only maintenance-free AC technology is used. This technique is characterized by a very long life and is robust to adverse environmental conditions. With the comfortable single-lever controller a variable speed control in forward and reverse drive is possible. The high-quality electric controller works almost without loss and protects your valuable battery pack against too deep discharge. With the modern controller we have the possibility to adapt the drive system optimally to your ship. Kräutler builds the Sail-Drivegearbox itself. Why? The gearbox has to be quiet, because only a quiet and smooth running gearbox has the best efficiency. For this reason, only spiral-toothed, polished and paired bevel gears are used. For use in salt or brackish water a bronze gearbox housing is used. The most Sail-Drives are supplied with a fiberglass foundation base, which can be laminated to the hull (depending on motor size). For this reason, the installation effort is kept to a minimum. For existing fiberglass foundations such as "Volvo" and "Yanmar" the Sail-Drive is equipped with a mounting plate and can be screwed directly on the existing foundation. up to boat weight Sailing boat Powerboat 2,0 t - SDK unlimited for seawater = SDKS 103420 base-plate for lamination for SDKH Sail-Drive with recuperation Mounting plate for various existing foundations such as Volvo, Yanmar, Yamaha, etc Control unit KCU 3.5 Control unit KCU 5.7 for passenger ships with the possibility to connect a camera Heat exchanger for 2-circle water cooling Boost function 30% performance increase for 2 minutes Kräutler Elektromaschinen GmbH, Hohenemser Str. 47, A-6890 Lustenau, Austria Telefon +43 / 55 77 / 82 534-0, Fax +43 / 55 77 / 82 534-10 www.kraeutler.at, E-mail: kraeutler@kraeutler.

Sail–Drive fixed All electric drives with Sail-Drive gear consist of: • • • • • • • Motor with appropriate Sail-Drive gear Base plate for lamination (depending on motor size) Electric regulation system mounted on an aluminium base plate with fuse and cut-off relay Single lever control (throttle) for panel mounting in standard version with key switch, status LED, black front panel, black aluminium lever and mounting screws o Special designs at additional cost Cable set: controller-battery 3m, controller-motor 1,5m, controller-single lever control 5m o Optional cable lengths at additional...