Catalogues - catalog-2008

Catalogue Catalog 2008

www.johnson-pump.com/JPMarine

Page

/ 40

Where to buy
this product ?

Request
a Quote

/ 40

See other catalogues for Johnson Pump

Text version of the page

HEAVY DUTY SUBMERSIBLE BILGE PUMPS

Choose the Johnson Pump range of submersible bilge pumps and you will not be disappointed. With a variety of mounting options, capacities of 30 to 252 L/min and clip on optional automatic switch. Johnson Pump submersible pumps can handle most of the bilge pump applications. Heavy duty motors with stainless steal (SS2343) shaft and tough thermoplastic bodies provide for a long pump life. With the Johnson Pump automatic switch installed, the pump automatically comes on when there is water in the bilge and shuts off when it is dry. Submersible bilge pumps are not self-priming and must be installed in the deepest part of the bilge.

CE marked according to following standards:

EN55014: 1993/Radio disturbance ISO8846: Small Craft - Electrical devices

- Protection against ignition of surrounding flammable gases

ISO8849: Small craft - Electrically operated bilge pumps ISO10133: Small Craft - Electrical systems

- Extra-low voltage DC installations

Submersible Bilge Pumps

The most economic bilge pump offering low cost and easy installation. Should be mounted in the lowest point in the bilge. The Cartridge pumps, 500GPH-1250GPH as well as 1600 -4000, can be combined with Johnson Pump new Ultima switch for fully automatic bilge puming operation. The series of Ultima Combo 500GPH-1250GPH UC is equipped with an Ultima switch. By using Johnson Pump bilge pump control panel, the pump can also be run manually. The Johnson Pump series of submersible bilge pumps offer a wide range with various flows.

Heavy Duty Bilge Pump series 1600-2200-4000 - 12 or 24 V DC

The best choice when you are looking for a high performance, heavy duty bilge pump that is designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The L2200 motor is sealed off by a mechanical seal design that eliminates shaft wear and allows for service and replacement, while the L1600 model has lipseal.The impeller is carefully designed and tested to maximize head and flow.

The L4000 high capacity, heavy duty bilge pump has been developed by Johnson Pump as the premier pump in our submersible bilge pump range. Featuring a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design, the L4000 will out perform all other comparable pumps on the market. Universal base plate and a choice of IVfe" or 2" ports makes for a simple installation. All L1600-L4000 pumps include a removable check valve.

_li+Yv remove ^owV^^rcheck vaWe

1600

SS2343 16GA

108 mm/4.25"

2200

SS2343 16GA

108 mm/4.25"

177 mm/7"

4000

SS2343

14AWG 121 mm/4.8" 216 mm/8.5"

Shaft: Wire size: Max dia:

Max height: 149 mm/5.86"

Weight: 1.3 kg/2.75 lbs 2.7 kg/6 lbs 2.45 kg/5.4 lbs


Order No.	Pump model	Capacity	Capacity	Amperage	Fuse size	Hose size
		1.0 m head (13.6 V/27 V)	straight (13.6 V/27 V)
16004	160012V	98 L/min - 1550 GPH	100 L/min - 1600 GPH	7 A	10 A	1¹/8" and 1%"
16084	1600 24 V	98 L/min - 1550 GPH	100 L/min - 1600 GPH	3.5 A	6 A	1¹/8" and 1%"
22004	2200 12V	120 L/min - 1900GPH	130 L/min - 2060 GPH	7.5 A	12 A	1¹/8" and 1%"
22084	2200 24 V	120 L/min - 1900GPH	130 L/min - 2060 GPH	4.5 A	6 A	1¹/8" and 1%"
40004	4000 12V	164L/min - 2600 GPH	252 L/min - 4000 GPH	15 A	25 A	1//" and 2"
40004-24	4000 24 V	164 L/min - 2600 GPH	252 L/min - 4000 GPH	7.5 A	15 A	1//" and 2"

sir

JOHNSON PUMP

An SPX Process Equipment Operation