| | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Take good care of the cooling system change to a new impeller every year The impeller is a very important security device. Its task is to pump the water through the cooling system of the engine. But remember that the impeller should be replaced every year. And always make sure you get a Johnson Pump original impeller. Then you'll know that it matches your pump exactly. The impeller compound MC97 MC97 has been developed to meet new environmental regulations for rubber manufacturing processes and will replace our regular Neoprene compound. The development of MC97 has also resulted in an extended service life of the impeller compared to impellers in Neoprene. MC97 requires new guidelines for handling impeller replacement as well as guidelines for standard- and engine cooling flexible impeller pumps for OEM-engine manufactures. Please note that these guidelines are also valid for our regular Neoprene compound. The MC97 impellers, impeller kits and service kits containing MC97 impellers will be supplied with a JP impeller marine lubricant. | | |
| | | |
| | | Johnson Pump Impeller Bar We can now offer a new impeller stand that can rotate and have room for 10 of our most popular spare impellers up to size F7. | | This is how to remove the old impeller | | |
| | | |
| | | Remove the impeller with a slip joint plier or a Johnson Pump Impuller. | | |
| | | |
| | | Display size: Height 750mm/29.5" incl. topsign Width 500 mm/19.7" Included are: • Impellerguide with 1/1 size illustration of all our impellers • 5 pes 09-806B-1 • 5 pes 09-808B-1 • 5 pes 09-810B-1 • 5 pes 09-1026B-1 • 5 pes 09-801B • 5 pes 09-1027B-1 • 5 pes 09-1028B • 5 pes 09-1052S-9 .JSE • 5 pes 09-1077B-9 • 5 pes 09-824P-9 | | |
| | | |
| | | Order No. 09-950-9300 JP Impuller | | |
| | | |
| | | This is how to fit the new one Lubricate the shaft and the inside of the pump body and the end cover. Use Johnson Pump lubrication to help develop prime and prevent damage from dry-running the pump at initial start-up. Mount the impeller by making a pushing and twisting movement in the rotating direction. Lubricated impellers should not be stored for extended periods of time. Engine should be run after installation of a new impeller to wash out the lubrication. These recommendations apply to any service work on the pump and its components that require the use of lubrication inside the pump for assembly and start-up. Warning! Only use Johnson Pump Lubrication. Other products can damage the impeller, which will damage the pump and lead to engine failure. Do not run the impeller without water or lubricant, this can cause engine failure or a fire. | | |
| | | |
| | | Order No: 09-46854 Complete stand including above impellers | | |
| | | |
| | | |
| | | Give your impeller a good life! Lubricate with Johnson Pump Impeller Lubricant, optimize the priming ability at first start or after seasonal storage. Now available in Counter display box with 150 pcs Impeller lubricant packages. Order No. 09-47086 Impeller Lubricant box | | |
| | | |
| | | JOHNSON PUMP An SPX Process Equipment Operation | | |
| | | |
| | | 31 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | |