| Available in a wide variety of different versions marketed under three basic models — standard and premium electric-powered or manual — the Johnson Pump AquaT™ marine toilet has been designed to meet virtually every conceivable lavatory installation situation onboard. Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT™ marine toilet, is quiet, robust and easy to clean. Using the Johnson Pump AquaT™ marine toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design. Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout. The AquaT™ toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service. Power models are shipped with well-proven Aqua Jet diaphragm pumps in either 12V or 24V versions, and the manual version incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use. It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the AquaT™ is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT™ marine toilet is perfect for almost any marine toilet room. Technical specifications: |