Catalogues - catalog-2008

Catalogue Catalog 2008

www.johnson-pump.com/JPMarine

Page

/ 40

Where to buy
this product ?

Request
a Quote

/ 40

See other catalogues for Johnson Pump

Text version of the page

Macerator Pump

TA3P10-19 - 12/24 V

Pump body: Phenol plastic (PF)

Impeller: 09-1052S-9 (nitrile)

Housing: Thermoplastic polyester (PET)

Shaft: Stainless steel

Seal: Lip seal

Hose connection: Inlet 1.¹/2"(dia 38 mm) hose or I.V2" NPT

Outlet 25.4 mm (1") hose

Motor: 12 or 24 V DC (with built-in thermal protection)

Capacity: 37L/min at 0.2 bar (10 GMP at 6.7 ft)

Dimensions and Weight Length: 230 mm/9.06"

Width: 108 mm/4.25"

Height: 82 mm/3.23"

Weight: 1.9 kg/ 4.2 lbs

CE marked according to following standards:

Recreational Craft Directive 94/25/EEC

ISO8846: Small Craft - Electrical devices - Protection against ignition of surrounding flammable gases

ISO10133: Small Craft - Electrical systems - Extra-low voltage d.c. installations

Electromagnetic Compatibility Directive 89/336/EEC

EN55014: 1993/Radio disturbance

The Johnson Pump macerator pump, TA3P10-19, takes care of toilet waste. A rotary cutter shreds waste before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet. Note! Use unbleached lavatory paper only. Motor has built-in thermal protection reducing the risk of damage when the pump is run dry.

Order No. 10-24453-01 12 V 10-24453-02 24 V

Max amp draw 15 9

Fuse size 20 10

Macerator pump ~"~

Three-way valve

Viking Thrudeck and Bulkhead

When the power is out you can always depend on the hand operated diaphragm bilge pump from Johnson Pump. The Viking pump can also be used for pumping toilet waste due to the large valve openings. The pump is available in two models for various installation alternatives. It can be mounted behind walls, through deck and under bulkheads.

Viking Thrudeck for installation behind vertical wall or under deck with sealing boot, complete with a cover plate. Viking Bulkhead for surface installation with horizontal lever.

Pump Body:

Shaft:

Screws:

Elastomers:

Handle:

Connection:

Stainless steel AISI 316 Stainless steel AISI 316

Nitrile

Anodised aluminium 1.¹/2" or 1" hose

Capacity Data

(At 1 m/3.28" suction height : 0.9 L/stroke) Capacity at:

60 stroke/min 54 L/min / 14.5 GPM 80 stroke/min 72 L/min /19 GPM 100 stroke/min 90 L/min/ 24 GPM

Max suction height 4 m/13 ft

Dimensions and Weight

Diameter: Handle length: Width: Height: Weight:

164 mm/6.45" 285 mm/11.22" 253 mm/9.96" 133 mm/5.23" 2 kg/ 4.5 lbs

Order No. 70-50005 70-50025 70-50007 70-50027

Description Thrudeck 1.V2" Thrudeck 1" Bulkhead 1.V2" Bulkhead 1"

JOHNSON PUMP

An SPX Process Equipment Operation