| | | A smarter way was needed to secure equipment to timber and composite decks and hulls. Now the JEC Marine Firmlock provides an elegant and efficient solution. Securing equipment to timber decks and hulls can be difficult if you need to remove bolts and replace them from time to time. Traditionally a metal plate would be secured to the timber and equipment bolted to that with problems of trapped water, unnecessary weight and complexity etc. With the JEC Marine FirmLock, a stainless steel insert is screwed and epoxied into the timber or fibreglass leaving a neat 'SecuraLock' thread. 'SecuraLock' threads accept standard thread bolts without the need for spring washers so you can use counter-sunk bolts. Now you can have complete confidence in a watertight and secure anchor point. JEC Marine FirmLocks are available in 2 sizes, M8 and M6 with other sizes available on request. | | JEC Marine FirmLocks have a 4.3mm keyway machined down the outer thread and a bevelled bottom edge to allow excess epoxy to escape the hole. | | |
| | | Jindra Energy Conversions Pty Ltd nit 26, 137-145 Rooks Road, Nunawading, VIC 3131 Australia. Phone: +61 3 8872 6555 Fax: +61 3 8872 6550 Email: info@energyconversions.com.au Website: www.energyconversions.com.au | | |