The output lever isn't welded to thevertical driving shaft but securedwith a double key. This provides the most flexible solution as the position of the lever depends on the variable deck thickness and can beadjusted during the installation. The distance between the bottom of thedeck flangeand the top of the lever is adjustablefrom 41 to 120 mm.Another advantage of this solutionis the fact that the steering geometrycan be swapped from starboardgeometry (standard) to port geometryduring the installation.

41 140 120 40.5

The draglink between the pedestal and the rudder is made of anodisedhigh strength aluminium, which provides a stronger and lighter solutionthan a stainless steel variant.

130

The rose joints on the draglink aren't industry joints, but a special design by Jefa Steering and made from high strength anodised aluminium with an easy removable delrin ballinside. This solution finally solves theelectrically disconnection of the rudder fromthe rest of the steering system and boat. All Jefa stainless steel and carbon steering wheels have a 25mm rim,instead of theusual 22 mm. Thisdramaticallyimproves the gripand feelof the steering wheel.

Jefa RP300 rack and pinion steering pedestal dimensions

200 155

The standard heights of the pedestal are 630, 710 and 800 mm. Custom heights are available at request.

220

The marine compass mounting flange should not exceed180mm diameter.

R5

The appropriate compass hole will be drilled when the compass is ordered together with the pedestal.

320 260

The pedestal mounting studs are availableinmultiplelengths to marine suit the cockpit floor thickness. The mounting studs arepositioned on a squareof220 by 180mm.

R49 160

The verticaldriving shaft offset relative to the middleof the pedestalis 24 mm in ships forward direction.

460

The RP300 should never be used without the RP300stopring to limit the travel of the output lever andavoid damage to the steering system and rudder system.

1040

Jefa Steering ApS Nimbusvej 2 2670 GREVE DenmarkTel: +45-46155210Fax: +45-46155208 E-mail: jefa@jefa.com

710

Jefa Sales Office The NetherlandsTel: +31 475 537760Fax: +31 475 537759 E-mail: sales@jefa.com

140 130 24

CE Jefa RP200& RP300 rack and pinion steering complies with ISO13929

Please visit our extended website and online cataloguewww.jefa.com for more information.