The output lever isn't welded to the vertical drivingshaft but secured witha double key. This provides the most flexible solution as the position of the lever depends on the variable deck thickness and can be adjusted duringthe installation. The distance between the bottom of the deck flange and the top of the leveris adjustable from 41 to 120 mm. Another advantageof this solution is the fact that the steering geometry can be swapped from starboardgeometry (standard) to port geometry during the installation.

41 140 120

The draglink between the pedestal and the rudder is made of anodisedhigh strength aluminium, which provides a stronger and lighter solutionthan a stainless steel variant.

40.5 130

The rose joints on the draglink aren't industry joints, but a special design by Jefa Steering and made from high strength anodised aluminium with an easy removable delrin ballinside. This solution finally solves theelectrically disconnection of the rudder fromthe rest of the steering system and boat. All Jefa stainless steel and carbon steering wheels have a 25mm rim,instead of theusual 22 mm. Thisdramaticallyimproves the gripand feelof the steering wheel.

Jefa RP200 rack and pinion steering pedestal dimensions

220 200 155

The standard heights of the pedestal are 630,710 and 800mm. Custom heights are availableat request.

M10

The compass mounting flange should not exceed 180 mm diameter.

320 260

The appropriate compass hole will be drilledwhen the compass is ordered together with the pedestal. The pedestal mounting studs are availableinmultiplelengths to boat suit the cockpit floor thickness. The mounting studs are positionedon a square of 220 by 180 mm.

R49 160

The vertical driving shaft offset relative to themiddle of the pedestal is 24 mm in shipsforward direction.

360

The RP200should never be used without the RP200 stopring to limit the travel of the outputlever and avoid damage to the steering systemand rudder system.

1040

Jefa Steering ApS Nimbusvej 2 2670 GREVE DenmarkTel: +45-46155210Fax: +45-46155208

710

Jefa Sales Office The NetherlandsTel: +31 475 537760Fax: +31 475 537759 E-mail: sales@jefa.com

140 130 24

CE Jefa RP200& RP300 rack and pinion steering complies with ISO13929

Please visit our extended website and online cataloguewww.jefa.com for more information.