J 111 specifications - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Standard technical specifications technical specifications HULL AND DECK DECK EQUIPMENT • End grained balsa / foam composite construction using biaxal and unidirectional glass with ISO NPG gelcoat and vinylester resin on the outer hull layer for a better warranty against hull blisters • “SCRIMP” resin infusion system moulding process for optimum laminate strength with 65% glass content in structural skins. • The moulding specifications conform with ISO, ABS and ISAF design regulations • White gelcoat hull finish with integrated moulded bootstripe in grey. • All bulkeads are laminated or glued to both the hull and deck. • Main bulkhead is a high strength sandwich moulding, it is glued to both the hull and deck. • Resin infused high strength grid pan structure transfers keel and rig loads into the hull • A modern high efficiency keel comprising of an iron cast fin with lead bulb is glued and bolted through the hull, with substantial counterplates. • Moulded non skid surfaces on the horizontal deck areas • Moulded toerails on the foredeck • High-aspect, balanced spade rudder constructed from biaxal and unidirectional glass, large diameter carbon stock mounted in JP3 self-aligning bearings • Stainless steel bow pulpit with double lifelines. LED bow navigation lights • Stainless steel chainplates for forestay, backstay, cap and lower shrouds • Forward mooring cleats (2) • Self draining foredeck anchor well, with drain for bowsprit tube • Opening hatch (500 x 500) to the fore cabin. • 2 x Jib tracks with ball-bearing cars and 8:1 adjustment purchase system • 2 x stainless steel handrails on coachroof top • Aluminium, anodised deck ring, with 5 pulleys to lead halyards and reef lines aft • 2 x four sheaves deck organisers to lead halyards aft • 3 x rope clutches each side of companionway, for halyards and control lines • 2 x #40 self tailing halyard winches, 2 speed mounted on aft end of coachroof • 2 clamcleats and 8:1 purchase system for inhauling jib sheets • 2 x winch handle storage pockets • Bullseye fairleads and cleat for furling line (on port coachroof side) • Bullseye fairleads and rope clutch for spinnaker tack line (onstarboard coachroof side) • Harken mainsheet track mounted on cockpit floor with 4:1 traveller control, • 6:1 mainsheet sytem with swivel base mounted on turret, 4:1 fine tune purchase system with swivel base mounted on turret, giving a final purchase of 24:1. • 2 x #46 self tailing primary winches, 2 speed, mounted on cockpit coamings • Large self-draining cockpit, with sail locker each sides, self draining gas bottle locker. • 2 low profile custom alloy fairleads to lead jib sheets to the winches • 2 stainless steel pushpits joined by triple lifelines across transom. LED stern light • 4 x padeyes with pulleys for Spinnaker sheets • 2 x Stern mooring cleats • Sliding companionway hatch with garage • Plexi companionway washboard with integral vent and lock • 2 opening windows over galley and chart table (Port and Starboard) • 2 large fixed windows for main saloon (Port and Starboard) • 2 rope storage bags • Manual bilge pump MAST AND RIGGING • Hallspars carbon fibre fractional rig. The mast is tapered and constructed with a clear varnish finish. Two pairs of aft swept spreaders. • Aluminium boom, finished in black paint to match mast, with internal 8:1 clew outhaul system and 2 reef pennants • Discontinuous stainless steel rod rigging and textile backstay • Hydraulic backstay adjuster, with remote control panel mounted on the forward face of the steering pedestal • Facnor tape-drive low profile furling forestay system, mounted on a rod forestay. • Retractable carbon fiber bowsprit black painted, deployed from cockpit by 2:1 control line led to cockpit • 1 x vectran Jib halyard • 1 x 2:1 dyneema main halyard • 1 x Spinnaker halyard with snapshackle • 2 x Jib sheets, 2 x Spinnaker sheets • Coarse/fine mainsheet, traveler control lines • Asymmetric spinnaker tack line, bowsprit control line • 2 x reef lines • Rigid vang with 18:1 integral purchase

 Open the catalogue to page 1

• Aluminium black painted steering wheel [1500mm] with natural leather grip on custom moulded pedestal with compass, brake and stainless steel guard rail • Emergency tiller INTERIOR ARRANGEMENT • Bulkheads and furniture covered in white formica, white gelcoat finished GRP mouldings, for a clean low maintenance finish • Timber effect laminate finished cabin sole boards • Saloon hull linings in white "plank" effect GRP moulding, painted finish in fore cabin and quarter berths FORE CABIN • Large double berth with cushions. Natural light and ventilation from overhead hatch [500 x 500] • Moulded toilet...

 Open the catalogue to page 2

All J-boats Europe catalogues and brochures

  1. J 97

    4 Pages

    En
  2. J 88

    4 Pages

    En
  3. J 70

    4 Pages

    En
  4. J 95

    4 Pages

    En
  5. J 100

    3 Pages

    En
  6. J 133

    6 Pages

    En
  7. J 122

    6 Pages

    En
  8. J 109

    6 Pages

    En
  9. J 108

    4 Pages

    En
  10. J 92S

    4 Pages

    En
  11. J 80

    4 Pages

    En
  12. J 111

    11 Pages

    En

Archived catalogues

  1. J/105

    4 Pages

    En